EPD150-PRO DryFan 150 Pt Stainless Steel Desiccant Dehumidifier

120V supply 60 Hz that can be run off a 12V DC-110V AC converters (220V option), auto power reset in case of power supply interruption. 74 pints (35 liters) commercial desiccant dehmidifier using “3-hole” technology. Operating range from -4?F up 104?F maximum room temperature for continuous drying applications, with 267 CFM air volume capacity (223 CFM – exhaust / 44 CFM – regen air flow). Highly efficient, very quiet fan operation (49dB) and yet low energy consumption in use for large moisture extraction capacity. 56dB Process air in 5″ – Process air out 5″ – Exhaust air 3″

install dehumidifiers dehumidifiers by Ecor Pro
dehumidifier download user manual dehumidifiers by Ecor Pro
compare our products dehumidifiers by Ecor Pro

Positive or Negative Focus Flood Drying

Tent can not be sealed (3-hole drying). More effective to seal the tent using a 4-hole system
Positive Splitting Dry Airflow

Positive Pressure Splitting Dry Airflow 2

Negative Pressure Inside

How to set up a drying tent

NO WATER PRODUCED. MOISTURE IS VENTED AWAY EVEN UPWARDS

Used For Restoration, Sea Vessels & Catering Industries.

74 Pint Desiccant Dehumidifier 110V / 60Hz

Equivalent to a 150 Pint Compressor Dehumidifier @65°F

Free Standing or Installed

Industrial dehumidifier EPD150 PRO stainless steel construction.Very small for its 74 pint capacity. Will dry 24/7 and dry even down to -20°C/-4°F. Can work up to 40°C/104°F.

Stainless Steel Inside & OutTough Enough Even for Hiring or Restoration

Can be carried by one person and transported easily with the carrying handles.Self regulating energy usage that adapts to air pressure differences using always the right amount of power to dry effectively

3 Hole Dehumidifier

Input process air is dust filtered & dried. Input air can be ducted in & out with a 125mm / 5″ duct. Wet air exhaust is 80mm / 3″ duct

Ecor Pro’s research shows that the EPD150 PRO will be four to seven times faster at drying buildings at low temperatures than a traditional compressor dehumidifiers

Parts Associated

Features Explained

Highly Compact – Small 74 pint dehumidifier in the market.

 
Dust Filter – Simple reticulated dust filter in a metal frame. Shakened clean or easily replaced. Prevents dust particles entering the unit and impeding performance.
 
Easy Repair – Maintenance and eventual repair have been thought through with an easy to remove cover that gives easy access to replace cord sets or warn parts by a qualified persons quickly. Prolonging the lifetime of the EPD150 dehumidifier. Cord sets can be replaced in around 20 minutes
 
On Four Feet – Anti scratch plastic feet.
 
Carrying Handle – Easy to carry by one person. The handles also protect the dehumidifier duct flanges if in transit.
 
Humidistat Connection – There is no integral humidistat but one can be added very simply. A military standard connector is on the front of the unit.To add this use the remote humidistat EPHUM220.This will turn the dehumidifier on an off automatically.
 
Duct Air-In & Out – The dehumidifier has all ducts fitted with flanges to allow ducting to be added with 125mm / 5″ hard or flexible ducting.

Perfect for any climate.

Wet Air Exhaust – The EPD150 has one internal fan compared to two in the EPD200. Both do not produce water. The moisture is vented away allowing it to work in colder temperatures. The moisture is purged from the system by 15% of the process air. Dries with a small negative pressure.

 
“Three Hole System” – One inlet and two outlets. Can be used as a four hole industrial dehumidifier via duct configuration.  If this is a concern then the EPD200 is an easier alternative
 
Power Supply – 110V supply 60Hz
 
Auto Reset – If there is an interruption to the power supply, the EPD150 will continue to operate as soon as the power has been returned. Perfect in locations where the there is a “dirty” power supply that can affect other electronically controlled products.
 
All Metal Construction – All metal with epoxy paint finish heat treated for strength inside & outside. Designed for longevity.
 
5m / 15′ Power Cord – no need to join cables when placed for instance in crawl spaces or lofts in the home for example.

Dehumidifier Installation

 

 

This is a 3-Hole dehumidifier meaning that there is one  fan inside.  Part of the dried process air is turned around, heated and used to purge the internal adsorption wheel of moisture that can be then vented away.

Moisture is "vented away".  No water is produced.  The moist air is vented to the outside or moved to another area that is ventilated. Most common installation.

Focussing the dry air gives faster drying times.  Example of "Positive Pressure" or forcing the dry air into areas it is needed
Recirculating the air to be dried gives a compound effect and gives faster drying.  This system is a "Negative Pressure" system.   Air has to replace the air that has been exhausted with the wet air.

15% of the air that is processed is expelled as wet air.  This air needs to be replaced.  Air from outside the room may be more humid.  This is averted with a larger model.

Having the machine in the area being dried and recirculating the air is the most efficient way of drying.  This system is "Negative Pressure. In a small enclosure, covered with plastic sheeting a frame is needed to ensure the tent maintains structure.  Rooms generally are not air tight so in larger rooms air can leak under doors etc

3-hole systems have one advantage over 4-Hole systems.  Around 60 Watts of energy will be retained in the process air flow with a 4-Hole system.  Normally this is not a problem (Same energy as an old home light bulb) but if it is a variable air valve may be added to balance the system with regen air. 

This assumes that the air from any variable inlet (variable in order to find balance of air flow) is colder than the air inside the room being dried.   Typical applications will include  buildings where heat generated by people is not covered fully by any air conditioning.

Weight 17.5 kg
Dimensions 56 × 35.2 × 34.5 cm
(L x W x H)-(weight)

17.52" x 13.86" x 13.58" – 38.58lbs

Technology

Desiccant

Max Extract

35L-74pt

Power / Plug / Cord length

850W, 110V, 60Hz, 7.1A / Yes US

Barcode

UPC 860001398052

Colour / Material

Stainless Steel

Duct Sizes

80mm (3.0")-125mm (5")

Swimming Pool Ready

No

Humidistat Inside / Humidistat Option

No / Yes

Carrying Handle / Water Container / Power Cord Length

Yes / No / 15"

Fan Speeds / Sound

1 / 56dB

Operting Temperature

Minus 4?F to plus 104?F

Power Out Restart / Works From DC-AC Coverter

Yes / Yes

Airflow CFM

267

Power Out Restart

Yes

Works From DC-AC Coverter

Yes

Water Tank

No

Material

ETL, CETL

You recently viewed...