EPD150-PRO DryFan 150 Pt Edelstahl-Trockenmittel-Luftentfeuchter

120V-Versorgung 60 Hz, die von einem 12V DC-110V AC-Wandler (220V-Option) betrieben werden kann, automatische Netzrückstellung bei Unterbrechung der Stromversorgung. 74 Pints (35 Liter) kommerzieller Trockenmittel-Dehydrierer mit "3-Loch"-Technologie. Betriebsbereich von -4?F bis zu 104?F maximaler Raumtemperatur für kontinuierliche Trocknungsanwendungen, mit 267 CFM Luftvolumenkapazität (223 CFM - Abluft / 44 CFM - Regenerationsluftstrom). Hocheffizienter, sehr leiser Lüfterbetrieb (49dB) und dennoch geringer Energieverbrauch im Einsatz für große Feuchteentnahmekapazität. 56dB Prozessluft in 5″ - Prozessluft aus 5″ - Abluft 3″

Luftentfeuchter installieren Luftentfeuchter von Ecor Pro
Luftentfeuchter Download Benutzerhandbuch Luftentfeuchter von Ecor Pro
vergleichen Sie unsere Produkte Luftentfeuchter von Ecor Pro

Positive or Negative Focus Flood Drying

Tent can not be sealed (3-hole drying). More effective to seal the tent using a 4-hole system
Positive Splitting Dry Airflow

Positive Pressure Splitting Dry Airflow 2

Negative Pressure Inside

How to set up a drying tent

KEIN WASSER PRODUZIERT. FEUCHTIGKEIT WIRD AUCH NACH OBEN ABGEFÜHRT

Gebraucht für Restauration, Seeschiffe und Catering-Industrie.

74 Pint Trockenmittel-Luftentfeuchter 110V / 60Hz

Entspricht einem 150-Pint-Kompressor-Luftentfeuchter bei 65°F

Freistehend oder installiert

Industrial dehumidifier EPD150 PRO stainless steel construction.Very small for its 74 pint capacity. Will dry 24/7 and dry even down to -20°C/-4°F. Can work up to 40°C/104°F.

Stainless Steel Inside & OutTough Enough Even for Hiring or Restoration

Selbstregulierender Energieverbrauch, der sich an Luftdruckunterschiede anpasst und immer die richtige Menge an Energie zum effektiven Trocknen verwendet.

3-Loch-Luftentfeuchter

Die eingehende Prozessluft wird staubgefiltert und getrocknet. Die Eingangsluft kann mit einem 125mm / 5″ Kanal ein- und ausgeleitet werden. Die Abluft für feuchte Luft beträgt 80 mm / 3″ Kanal.

Die Untersuchung von Ecor Pro zeigt, dass der EPD150 PRO bei der Trocknung von Gebäuden bei niedrigen Temperaturen vier- bis siebenmal schneller sein wird als ein herkömmlicher Kompressor-Luftentfeuchter

Zugehörige Teile

Erklärte Merkmale

Highly Compact – Small 74 pint dehumidifier in the market.

 
Dust Filter – Simple reticulated dust filter in a metal frame. Shakened clean or easily replaced. Prevents dust particles entering the unit and impeding performance.
 
Einfache Reparatur - Die Wartung und eventuelle Reparatur wurde mit einer leicht zu entfernenden Abdeckung durchdacht, die einen einfachen Zugang zum schnellen Austausch von Kabelsätzen oder Warnteilen durch eine qualifizierte Person ermöglicht. Die Lebensdauer des Luftentfeuchters EPD150 wird verlängert. Die Kabelsätze können in etwa 20 Minuten ausgetauscht werden.
 
Auf vier Füßen - kratzfeste Plastikfüße.
 
Carrying Handle – Easy to carry by one person. The handles also protect the dehumidifier duct flanges if in transit.
 
Humidistat Connection – There is no integral humidistat but one can be added very simply. A military standard connector is on the front of the unit.To add this use the remote humidistat EPHUM220.This will turn the dehumidifier on an off automatically.
 
Duct Air-In & Out - Der Luftentfeuchter hat alle Kanäle mit Flanschen versehen, so dass Kanäle mit 125mm / 5″ harten oder flexiblen Kanälen hinzugefügt werden können.

Perfekt für jedes Klima.

Wet Air Exhaust – The EPD150 has one internal fan compared to two in the EPD200. Both do not produce water. The moisture is vented away allowing it to work in colder temperatures. The moisture is purged from the system by 15% of the process air. Dries with a small negative pressure.

 
“Three Hole System” – One inlet and two outlets. Can be used as a four hole industrial dehumidifier via duct configuration.  If this is a concern then the EPD200 is an easier alternative
 
Stromversorgung - 110V-Versorgung 60Hz
 
Auto Reset - Bei einer Unterbrechung der Stromversorgung setzt der EPD150 seinen Betrieb fort, sobald die Stromversorgung wieder hergestellt ist. Perfekt an Orten, an denen die Stromversorgung "schmutzig" ist und andere elektronisch gesteuerte Produkte beeinträchtigen kann.
 
Ganzmetallkonstruktion - Ganzmetall mit Epoxidlackierung, wärmebehandelt für Festigkeit innen und außen. Ausgelegt für Langlebigkeit.
 
5m / 15′ Netzkabel - keine Notwendigkeit, Kabel zu verbinden, wenn sie z.B. in Kriechräumen oder Lofts in der Wohnung verlegt werden.

Dehumidifier Installation

 

 

This is a 3-Hole dehumidifier meaning that there is one  fan inside.  Part of the dried process air is turned around, heated and used to purge the internal adsorption wheel of moisture that can be then vented away.

Moisture is "vented away".  No water is produced.  The moist air is vented to the outside or moved to another area that is ventilated. Most common installation.

Focussing the dry air gives faster drying times.  Example of "Positive Pressure" or forcing the dry air into areas it is needed
Recirculating the air to be dried gives a compound effect and gives faster drying.  This system is a "Negative Pressure" system.   Air has to replace the air that has been exhausted with the wet air.

15% of the air that is processed is expelled as wet air.  This air needs to be replaced.  Air from outside the room may be more humid.  This is averted with a larger model.

Having the machine in the area being dried and recirculating the air is the most efficient way of drying.  This system is "Negative Pressure. In a small enclosure, covered with plastic sheeting a frame is needed to ensure the tent maintains structure.  Rooms generally are not air tight so in larger rooms air can leak under doors etc

3-hole systems have one advantage over 4-Hole systems.  Around 60 Watts of energy will be retained in the process air flow with a 4-Hole system.  Normally this is not a problem (Same energy as an old home light bulb) but if it is a variable air valve may be added to balance the system with regen air. 

This assumes that the air from any variable inlet (variable in order to find balance of air flow) is colder than the air inside the room being dried.   Typical applications will include  buildings where heat generated by people is not covered fully by any air conditioning.

Gewicht 17,5 kg
Abmessungen 56 × 35,2 × 34,5 cm
(L x B x H)-(Gewicht)

17,52" x 13,86" x 13,58" - 38,58lbs

Technologie

Trockenmittel

Maximaler Auszug

35L-74pt

Leistung / Stecker / Kabellänge

850W, 110V, 60Hz, 7,1A / Ja US

Strichcode

UPC 860001398052

Farbe / Material

Rostfreier Stahl

Kanal-Größen

80mm (3,0")-125mm (5")

Schwimmbad bereit

Nein

Humidistat Innen / Humidistat Option

Nein / Ja

Tragegriff/Wasserbehälter/Stromkabellänge

Ja / Nein / 15"

Lüfterdrehzahlen/Schall

1 / 56dB

Temperatur öffnen

Minus 4?F bis plus 104?F

Neustart bei Stromausfall / Funktioniert vom DC-AC Coverter

Ja / Ja

Luftstrom CFM

267

Neustart bei Stromausfall

Ja

Werke von DC-AC Coverter

Ja

Wassertank

Nein

Material

ETL, CETL

Sie sahen kürzlich...