DSR1220DUCT Duct Converter for DSR12 or DSR20

Duct conversion kit that adds to a DSR units in seconds to convert air-inlet to a circular 315mm / 12″. For DSR12 & DSR20. Made from mild steel with epoxy paint finish. Supplied with new air filter and circular flange for the air outlet side to be attached by pop-rivet.

dehumidifier download user manual dehumidifiers by Ecor Pro
dehumidifier download user manual dehumidifiers by Ecor Pro
DSR20 ecor pro metal filter grill dehumidifiers by Ecor Pro


Ideal for linking to spiral ducting

Installed in Minutes

Industrial dehumidifier DH800 steel construction with tough epoxy paint finish.

Very small for its 8 litre capacity. Will dry 247 and dry even down to -20°C/-4°F. Can work up to 40°C/104°F. Perfect for any climate.

Mild Steel with Epoxy Paint Finish

The rear fitting flange is pre-drilled to marry easily against the DSR dehumidifiers. The inlet duct coupling fits into the exiting filter frame with its own filter housing.  Allowing air filtration while circular duct coupled.
Take care when coupling to ducting that this air filter is accessable.  Alternatively, remove the air filter and use another filter on the inlets of the ducting added.  The filter housing that comes with the DSR dehumidifier becomes redundant in use.
Both the filter coupling & rear flange can be fitted in less than 1 minute allowing fast installation.   Note the rear outlet is 91mm off the DSR centre line.


Parts Associated

Features Explained

Outlet flange – Pre-drilled adaptor that comes with the kit to marry outlet to circular ducting.

Dust Filter – The desiccant industrial dehumidifier benefits from a simple reticulated dust filter in metal frame that can be shaken clean or easily replaced to prevent dust particles entering the unit and impeding performance.

Quick Inlet Connection – Sits inside the existing filter frame of the DSR unit

All Metal Construction – All metal with epoxy paint finish heat treated for strength inside & outside. Designed for longevity.
Weight 4 kg
Dimensions 65 × 35 × 40 cm
(L x W x H)-(weight)

25.6" x 13.8" x 15.8" – 8.8 lbs


Duct Converter


EAN 5060224950500




Mild steel expoxy coated

Colour / Material

White / Mild Steel Epoy Paint

Duct Sizes

315mm (12")

Swimming Pool Ready


Humidistat Inside / Humidistat Option

Not Applicable

Carrying Handle / Water Container / Power Cord Length

Not Applicable / Not Applicable

Fan Speeds / Sound

Not Applicable / Not Applicable

Operting Temperature

Minus 20?C to plus 40?C

Power Out Restart / Works From DC-AC Coverter

Not Applicable / Yes


Not Applicable