WATER CONDENSATE PRODUCED.
WATER IS GRAVITY DRAINED AWAY.
Ideal for Offices, Pools, Museums & Storage
110 Litre Compressor Dehumidifier 220V / 50Hz
Swimming Pool Ready
Free Standing or Ceiling Hung
Will dry 247 and dry to 40°C/104°F. Can work down to 4°C/40°F.Internally protected for use in swimming pool areas if needed. Used in a wide variety of commercial applications from storage to production areas and commercial buildings such as museums and offices.
Very easy to access the internal parts for any service needed.Comes with internal re-gassing points.
All Steel Construction
Controls are accessible from the rear.An additional plug in humidistat can be added to control the dehumidifier to regulate the humidity level automatically.
Energy efficient with optimum cooling and compressor operating times based on an internal microprocessor calculation to optimize performance.
One brass plumbing drain hole with screw tread for secure connection
Parts Associated
Features Explained
Extraction – Very strong 110 Litre warehouse dehumidifier that can be used in swimming pools.
Reticulated Foam Filter – The dust filter can be shaken clean periodically to prevent dirt entering the dehumidifier. Very easy to access with two clip springs keeping the metal filter frame in place that are easily opened.
Easy Repair – Easy access to key parts from the top cover.
On Four Rubber Feet – Often slung from beams on hangers high up to allow access to filters for cleaning and to maximize the extraction as moisture migrates upwards.
Two Fan Speeds – The fan setting can be changed by the external switch on the rear of the unit.
Power Supply – 220V 50Hz
Auto Reset – If there is an interruption to the power supply, the dehumidifier will resume automatically controlled by the humidistat (not provided).The unit will have stagger start up so that if several DSR units are used in the same building, surge current should not trip power breakers.
Jack Plug Humidistat Connection – The jack plug for connecting an EPHUM24 low voltage humidistat is provided.The two core wire is not.. Flicking the switch to enable the external humidistat (low voltage and not provided) means regulating moisture to the space being dried is easy.Soldering is required from any wire to the jack plug.
Drainage – Gravity drained through a standard 15mm (3/4″) brass fitting. Can be used in conjunction with condensate pump if needed to pump water to a higher height (not provided).Can be used in conjunction with a condensate pump if gravity draining is not possible.
2m / 6″ Power Cord – If placed near to water supply the plug should be removed and hard wired to a fused splash proof power socket.