Filter
Stainless steel industrial dehumidifier that is used for drying homes and out buildings as well as vacation homes
Stainless steel industrial dehumidifier that is used for drying homes and out buildings as well as vacation homes
Stainless steel industrial dehumidifier that is used for drying homes and out buildings as well as vacation homes
Stainless steel industrial dehumidifier that is used for drying homes and out buildings as well as vacation homes
Stainless steel industrial dehumidifier that is used for drying homes and out buildings as well as vacation homes
Stainless steel industrial dehumidifier that is used for drying homes and out buildings as well as vacation homes
White industrial dehumidifier that is used for drying homes and out buildings as well as vacation homes
Stainless steel industrial dehumidifier that is used for drying homes and out buildings as well as vacation homes
Stainless steel industrial dehumidifier that is used for drying homes and out buildings as well as vacation homes
Stainless steel industrial dehumidifier that is used for drying homes and out buildings as well as vacation homes
Stainless steel industrial dehumidifier that is used for drying homes and out buildings as well as vacation homes
Stainless steel industrial dehumidifier that is used for drying homes and out buildings as well as vacation homes
Stainless steel industrial dehumidifier that is used for drying homes and out buildings as well as vacation homes
White industrial dehumidifier that is used for drying homes and out buildings as well as vacation homes

DH800 INOX DryFan 8L Stainless Steel Desiccant Dehumidifier

Stainless steel. 220V supply 50 Hz that can be run off a 12V DC-220V AC converters or 110V to 220V transformers, auto power reset in case of power supply interruption. “3-hole” technology commercial desiccant dehumidifier; water removal 8 litres maximum extraction. Operating range from -20°C up 40°C maximum room temperature for continuous drying applications, with 380 m3/hr air volume capacity (90 m3/hr – Process / 14m3/hr – exhaust air flow). Highly efficient, very quiet fan operation and yet low energy consumption in use for large moisture extraction capacity. 49dB Process air in 125mm – Process air out 125mm – Exhaust air 40mm

SKU: DH800INOX Categories: , , , , , ,
install dehumidifiers dehumidifiers by Ecor Pro
dehumidifier download user manual dehumidifiers by Ecor Pro
compare our products dehumidifiers by Ecor Pro

NO WATER PRODUCED.MOISTURE IS VENTED AWAY. EVEN UPWARDS.

Ideal for Flood Drying, Building Maintenance & Storage

8 litre Stainless Steel Desiccant Dehumidifier 220V / 50Hz

Equivalent to a 16 Litre Compressor Dehumidifier @18°C

Free Standing or Installed

Industrial dehumidifier DH800 stainless steel construction .Very small for its 8 litre capacity. Will dry 24/7 and dry even down to -20°C/-4°F. Can work up to 40°C/104°F.

Stainless Steel Inside & OutTough Enough Even for Hiring or Restoration

Can be carried by one person.Transported easily with the removable carrying handles.Self regulating energy usage that adapts to air pressure differences using always the right amount of power to dry effectively.

3 Hole Dehumidifier

Input process air is dust filtered & dried. Input air can be ducted in & out with a 125mm / 5″ duct. Wet air exhaust is 40mm / 1.5″ duct.

Furthermore, Ecor Pro’s research shows that the DH800 will be four to seven times faster at drying buildings at low temperatures than a traditional compressor dehumidifiers.

Parts Associated

Features Explained

Highly Compact – Small 8 Litre dehumidifier in the market.

Dust Filter – Simple reticulated dust filter in metal frame. Shakened clean or easily replaced. Prevent dust particles entering the unit and impeding performance.
Easy Repair – Maintenance and eventual repair have been thought through with an. Easy to remove cover. Quickly gives easy access to replace cord sets or warn parts via a qualified persons. Prolongs the lifetime of the dehumidifier.
On Four Feet – Design patented anti scratch plastic feet. Swivel out to provide. Anchor points for the dehumidifier.
Carrying Handle – Removable handle. Easy to carry by one person. Replaced by a top lid without handle, if needed.

Humidistat Connection – There is both and internal humidistat fitted & the possibility to put on an external humidistat but one can also be added very simply. A jack plug connector is on the on the humidistat EPHUM24DF. This will turn the dehumidifier on an off automatically remotely if the dehumidifier is concealed or ducted in position.

Perfect for any climate.

Duct Air-In & Out – The dehumidifier has all ducts fitted with flanges to allow ducting to be added with 125mm / 5″ hard or flexible ducting.

Wet Air Exhaust – The has one internal fan. The moisture is vented away allowing it to work in colder temperatures. Moisture purged from the system by 15% of the process air. Dries with small negative pressure.
“Three Hole System” – One inlet and two outlets.Note that the DH12XX dehumidifiers have a process air outlet flange. The DH8XX models do not. Thus, dry air can be ducted into a space.
Power Supply – Thus, 220V supply 50Hz
Auto Reset – If there is an interruption to the power supply, the dehumidifier will continue to operate as soon as the power has been returned. Perfect in locations where the there is a “dirty” power supply that can affect other electronically controlled products.
All Metal Construction – All stainless steel metal inside & outside. Designed for longevity.
5m / 15′ Power Cord – No need to join cables when placed for instance in crawl spaces or lofts in the home for example.

Dehumidifier Installation

This is a 3-Hole dehumidifier meaning that there is one  fan inside.  It is a Axial fan unlike the other larger units in the range.  Axial fans have the advantage of needing less power but have less fan pressure.  Fan pressure is needed to force through ducting.  That is why there is no ducting flange on the outlet of this unit.  Part of the dried process air is turned around, heated and used to purge the internal adsorption wheel of moisture that can be then vented away.

Moisture is "vented away".  No water is produced.  The moist air is vented to the outside or moved to another area that is well ventilated. Most common installation. If the machine is in the room being dried the internal humidistat can be used to regulate humidity.  If ducted and outside the room or house being dried an external humidistat may be needed.
Perfect for crawl space areas or attic areas.  Close openings to the crawl space and the unit will regulate the humidity.  Use ducting to help spread the dry air around the crawl space area.
Recirculating the air to be dried gives a compound effect and gives faster drying.  This system is a "Negative Pressure" system.   Air has to replace the air that has been exhausted.  In a normal home air is actually being replaced  frequently typically 2.5 times per hour. No home is air tight.
The machine can just be put in any room such as a garage.  Here the larger model is shown but in smaller garages it can be sufficient.  Moisture is simply vented away.  To read more about garages see here

Used on Boats as a "Carry on" or Installed

Used in many areas on boats.  Read More
Weight 5.5 kg
Dimensions 34.5 × 26 × 27 cm
(L x W x H)-(weight)

7.9" x 7.9" x 7.9" – 10.58 lbs
Technology

Desiccant
Max Extract

8L-16.9pt
Power / Plug / Cord length

350W, 220V, 50Hz, 1.5A / Yes BS/EU
Barcode

8720648456022.
Colour / Material

Stainless Steel
Duct Sizes

40mm (1.5")-125mm (5")
Swimming Pool Ready

No
Humidistat Inside / Humidistat Option

Yes / Yes
Carrying Handle / Water Container / Power Cord Length

Yes / No / 3m
Fan Speeds / Sound

1 / 49dB
Operting Temperature

Minus 20?C to plus 40?C
Power Out Restart / Works From DC-AC Coverter

Yes / Yes
Airflow m3/hr

90 process / 14 exhaust
Power Out Restart

Yes
Works From DC-AC Coverter

Yes
Water Tank

No
Material

Stailess steel
Approval

CE