USA / CA Products
UK/EU/AUS Products
Product Accessories
Drying Mats
Install Guides
Compare Us
80Litre / 170 Pint Low Grain Refrigerant Dehumidifier
Integral Pump. Ideal for restoration and construction.
USA/CA/EU/UK Manual
Compare
Condensate Produced: Water Pumped Away
Designed for flood restoration and building drying (paint/plaster). Operates up to +38°C / 100°F and stops at
+4°C / 40°F. Includes a 40 ft / 12 m drainage hose (push-fit onto protected spigot).
Easy-access panels simplify servicing and maintenance.
Construction: Rotor-moulded plastic body. Front-access electronic controls measure runtime and amps to help estimate energy costs.
EU versions use a commercial water-resistant plug; North American models use a standard domestic plug.
Features Explained
Extraction (North America, R410a, 110V 60Hz)
170 pints/day (95°F RH95%)
135 pints/day (86°F RH80%)
80 pints/day (80°F RH60%)
Extraction (Europe, R290a, 220V 50Hz)
80 L/day (35°C RH95%)
55 L/day (30°C RH80%)
35 L/day (27°C RH60%)
- Wire Mesh & Carbon Filter: lockable aluminium outer frame; durable and easy to clean.
- Easy Repair: side panels/top cover remove for access to drain tray, pump, and electrics.
- Mobility: four rubber feet + two wheels; stable and easy to drag over uneven floors/steps.
- Fan: fixed for maximum performance (420 m³/hr / 247 cfm).
- Auto Reset: resumes automatically after power interruption.
- Drainage: push-fit connector; recessed for transport protection; pumps up to 11 ft / 3.5 m.
- Power Cord: replaceable kettle lead for transport and easy replacement.
Side Dry Air Out for Focus Drying
Allows ducting for tented areas—faster drying and lower energy costs.
Product Images & Parts
Product Videos
Focus Flood Drying
Need to know efficiency?
Learn how we offset carbon footprint against planting trees.
Now compatible to Ecor Pro EPHUM-I-MAX
Free Humidistat, Data Logger and Remote Control
All Icons Shown
Main - Top
Your standard phone status bar. Not part of the App.
Device name. This can be changed by clicking on the pencil symbol to identify the device. Unlimited number of devices can be controled with one phone or linked wto computer with specialised serial interface.
Clicking on the logo will take you to the Ecor Pro website
Link to the Ecor Pro Page for trouble shooting faults.
Only appears when an internal device fault causes overheating
Frost warning / Temperature warning if set green on Settings page.
- Snowflake Red/White if freezing or below.
- Amber if below 5°C/41°F
- Heat Symbol Amber above 35°/95°F
- Red if above 40°C/95°F
- Hidden otherwise
THESE ARE EXTERNAL SENSOR READINGS
Filter indicator.. Countdown over 90 days. Can be reset after filter cleaning anytime.
Green/White - filter < 30 days
Green/Grey - filter 30 - 60 days
Red/White - filter needs cleaning > 90 days
TIMER FUNCTION ONLY. NOT BASED ON AIR FLOW. DATA HELD INSIDE UNIT
Alarm for humidity or temperature warning set on the Settings page.
Either temperature or humidity is too High (Hi) or too Low (Lo)
The cog symbol will take you to the settings page
All Icons Shown
Main - Upper
Drop indicates humidity contol selected. Set the humidity level you wish to acheive down to be pressing the green dot next to %.
Slide to the desired level and then press confirm.
Showing status of unit on being controlled by relative humidity level (RH%)
Thermometer indicates temperature contol selected. Set the temperature to the level you want to control up to °F/°C (Setting Page selected) . Note a dehumidifier will not necessarily produce heat. Used for Ecor Pro heating appliances and selective humidity control. Select level you wish to acheive up to by pressing the green dot next to level. Higher temperature than that selected will turn unit off.
Slide to the desired level and then press Confirm.
Status unit on controlled by temperature level.
Up to 24 Hour count down indicator in hour & minutes. Whole hours can be selected from.
Clicking on coundown button lets you select up to 24 hours of operation before shut down. Unit must be in an ON sate prior.
Click to enlarge
Cancel by selecting zero hours and confirm.
Relative Humidity % reading of external sensor. To get a true accuracy put the sensor in the air flow using the clips provided attaching to the outside inlet grill.
EXTERNAL SENSOR READINGS
Temperature reading of sensor. To get a true accuracy put the sensor in the air flow using the clips provided. Temperature can be in °F/°C by selecting on the settings page.
EXTERNAL SENSOR READINGS
All Icons Shown
Main - Lower
All data page.
Click to enlarge
Absolute humidity and dew point graphs over time. In Grains/Pound (if Imperial selected or Grams/Kilogram if Metric Selected.
Click to enlarge
Job kWH and Amps used graphs
Click to enlarge
Relative Humidity and Temperature in °F or °C graphs.
Click to enlarge
Create multiple timer events to switch on / off the appliance which overight other settings.
Click to enlarge
Click to enlarge
Up to 24 Hour count down indicator in hour & minutes. Whole hours can be selected from.
Clicking on coundown button lets you select up to 24 hours of operation before shut down if already ON.
Click to enlarge
Cancel by selecting zero hours and Confirm.
Link to Settings and Alarm page.
All Icons Shown
Main - Bottom
Temperature, Manual or Humidity operation modes.
Unit and app linked but not in operation.
Continuos fan selected on App or selected on unit.
Investigate unit air flow and temperature. Do not ignore!
INTERNAL OVERHEAT!