Filter

DH1211 INOX 110V DryFan 12L Stainless Steel Desiccant Dehumidifier

Unlike regular household dehumidifiers, the DH12XX 110V steel desiccant dehumidifier is purposely built for boats and other vessels propelled on fresh water by oars, sails or an engine using 110V. Small, compact and sturdy units are designed to run 24/7 that will extract moisture even down to -4°F (-20°C) room temperature – ideal for many boats, yachts and shipping or where cleanliness is important. The efficient performance of DH12XX not only helps protect the boats from the harmful effect of excessive moisture, it also prevents the electronics, furnishing and the very fabric of the hull from rotting inside and outside. Continuous use of the unit stops the bad smells associated with high humidity making the cabin more pleasant to inhabit. Salt-resistant housing is perfect for coastal and ocean environment condition.

SKU: DH1211INOX Categories: , , , , , ,
install dehumidifiers dehumidifiers by Ecor Pro
dehumidifier download user manual dehumidifiers by Ecor Pro
compare our products dehumidifiers by Ecor Pro

NO WATER PRODUCED.MOISTURE IS VENTED AWAY EVEN UPWARDS

Ideal for Flood Drying, Building Maintenance & Storage

12 litre Stainless Steel Desiccant Dehumidifier 110V / 50Hz

Equivalent to a 25 Litre Compressor Dehumidifier @18°C

Free Standing or Installed

Industrial dehumidifier DH1211 stainless steel construction .

Very small for its 12 litre capacity. Will dry 247 and dry even down to -20°C/-4°F. Can work up to 40°C/104°F.

Steel Inside & Out
Tough Enough Even for Hiring or Restoration

Can be carried by one person and transported easily with the carrying handles.

Self regulating energy usage that adapts to air pressure differences using always the right amount of power to dry effectively

3 Hole Dehumidifier

Input process air is dust filtered & dried. Input air can be ducted in & out with a 125mm / 5″ duct. Wet air exhaust is 40mm / 1.5″ duct

Ecor Pro’s research shows that the DH1211 will be four to seven times faster at drying buildings at low temperatures than a traditional compressor dehumidifiers

Parts Associated

Features Explained

Highly Compact – Perhaps the smallest 12 Litre dehumidifier in the market.

Dust Filter – Simple reticulated dust filter in metal frame. Shakened clean or easily replaced. Prevents dust particles entering the unit. Thus, impeding performance.

Easy Repair – Maintenance and eventual repair have been thought through with an easy to remove cover that gives easy access to replace cord sets or warn parts by a qualified persons quickly. Prolonging the lifetime of the dehumidifier.

On Four Feet – Design patented anti scratch plastic feet that swivel out. Good anchor points for the dehumidifier.

Carrying Handle – Easy to carry by one person. Handle can be removed. For example, when the product is being installed and replaced by a top lid without the handle.

Humidistat Connection – There is both and internal humidistat fitted & the possibility to put on an external humidistat but one can also be added very simply. A jack plug connector is on the on the humidistat EPHUM24DF. This will turn the dehumidifier on an off automatically remotely if the dehumidifier is concealed or ducted in position.

Perfect for any climate.

Duct Air-In & Out – The dehumidifier has all ducts fitted with flanges to allow ducting to be added with 125mm / 5″ hard or flexible ducting.

Wet Air Exhaust – The has one internal fan. The moisture is vented away allowing it to work in colder temperatures. The moisture is purged from the system by 15% of the process air so will dry with slight negative pressure.

“Three Hole System” – The system is classed as a “three hole” system due to the one inlet and two outlets.

Note that the DH12XX dehumidifiers have a process air outlet flange. The DH8XX models do not. Hence, dry air ducts into a space.

Power Supply – 110V supply 50Hz
Auto Reset – If there is an interruption to the power supply, the dehumidifier will continue to operate as soon as the power has been returned. Perfect in locations where the there is a “dirty” power supply that can affect other electronically controlled products.
All Metal Construction – All stainless steel metal inside & outside. Designed for longevity.
5m / 15′ Power Cord – no need to join cables when placed for instance in crawl spaces or lofts in the home for example.

Dehumidifier Installation

This is a 3-Hole dehumidifier meaning that there is one  fan inside.  It is a turbo fan like the other larger units in the range.  Part of the dried process air is turned around, heated and used to purge the internal adsorption wheel of moisture that can be then vented away.

Moisture is "vented away".  No water is produced.  The moist air is vented to the outside or moved to another area that is well ventilated. Most common installation. If the machine is in the room being dried the internal humidistat can be used to regulate humidity.  If ducted and outside the room or house being dried an external humidistat may be needed.
Perfect for crawl space areas or attic areas.  Close openings to the crawl space and the unit will regulate the humidity.  Use ducting to help spread the dry air around the crawl space area.
Recirculating the air to be dried gives a compound effect and gives faster drying.  This system is a "Negative Pressure" system.   Air has to replace the air that has been exhausted.  In a normal home air is actually being replaced  frequently typically 2.5 times per hour. No home is air tight.
The dehumidifier can be hidden from sight.  It can be placed in a cupboard, in a ceiling void or under a floor.  Dry air is taken from the room, dried and then clean, dry filtered air returned.  External humidistat may be needed in that instance.

To read more about garages see here

Perfect for crawl space areas or attic areas.  Close openings to the crawl space and the unit will regulate the humidity.  Use ducting to help spread the dry air around the crawl space area.

Strong Machine Even Used For Commercial Spot Drying

The model is build to a standard that professionals can also use.  The machine is perfect for focus drying.  Wet air is focussed to where the moisture is. Example of "Positive Pressure" or forcing the dry air into areas it is needed
Having the machine in the area being dried and recirculating the air is the most efficient way of drying.  This system is "Negative Pressure. In a small enclosure, covered with plastic sheeting a frame is needed to ensure the tent maintains structure.  Rooms generally are not air tight so in larger rooms air can leak under doors etc

Used on Boats as a "Carry on" or Installed

Perfect for ducting around the boat or for area such as cabin, engine room or forward locker.  Read More

Weight 7.2 kg
Dimensions 44 × 26 × 28 cm
(L x W x H)-(weight)

11.81" x 7.87" x 7.87" – 14.11 lbs
Technology

Desiccant
Max Extract

12L-25.4pt
Power / Plug / Cord length

550W, 110V, 50Hz, 4.6A / Yes BS/EU
Barcode

8720648456053.
Colour / Material

Stainless Steel
Duct Sizes

40mm (1.5")-125mm (5")
Swimming Pool Ready

No
Humidistat Inside / Humidistat Option

Yes / Yes
Carrying Handle / Water Container / Power Cord Length

Yes / No / 3m
Fan Speeds / Sound

1 / 52dB
Operting Temperature

Minus 20?C to plus 40?C
Power Out Restart / Works From DC-AC Coverter

Yes / Yes
Airflow m3/hr

124 process / 20 exhaust
Power Out Restart

Yes
Works From DC-AC Coverter

Yes
Water Tank

No
Material

Stailess steel
Approval

CE

You recently viewed...