EPCARFIL30 Carbon Filter Drum for Ecor Pro Dehumidifiers

Filter
New

Ecor Pro’s EPCARFIL30, A carbon filter drum fan 30cm /12′ in length. Ideal for handling ecess odours or where there is concerns of odour.   The prefilter included prologs the life of the filter from large particulates while the carbon absorbs even stong odours.  Filter the air before drying.

Carbon Filter

PET Prefilter, Activated Carbon in SECC Support with jubilee clip

PET non woven pre-filter.  Our Polyethylene terephthalate (PET), is clear, strong, lightweight and a 100% recyclable plastic

Cylindrical active carbon. Uses natural wood columnar activated carbon with test iodine value greater than 1000mg/g

For best results replace very six months.  Natural lifespan of product 12 months when in use.

SECC supportive mesh. SECC steel is electro-galvanized commercial quality cold rolled steel which is basically cold rolled and then coated with zinc in an electro-galvanizing line. SECC is a material grade and designation defined in JIS G 3313 standard.

Mating flange designed to work with Ecor Pro dehumidifiers of 125mm/5″ diameter.

Securing jubilee clip.  Tighten the dehumidifier securely with the jubilee clip.

Once secured in place the reticulated foam filter already inside the dehumidifier can be removed if required.

Easy Install

Take from box, Add prefilter over cylinder, pus onto inlet flange of dehumidifier. secure jubilee clip

For best results change in every six months of use.  Replace in 12 months of use.

Weight 2.5 kg
Dimensions 35 × 20.5 × 20.5 cm
Gross Weight (kg)

2.9
Nett Weight (kg)

2.5
Input Duct Diameter (mm)

125mm / 5"