EPD50-MAX WiFi Desiccant Semi-Pro Dehumidifier

13 Litre / 26 Pint DESICCANT DEHUMIDIFIER FOR THE HOME OR WORK PLACE

Free WiFi data logger and remote control

What’s Included in the Box

✅ EPD50-MAX unit with standard filter
✅ EPDF125 flange (125mm / 5″) Outlet
✅ EPDF125 flange and filter holder (125mm / 5″) inlet
✅ EPHUM-I-MAX humidistat (2m cable)
✅ 1m (3′) exhaust duct (45mm)
✅ Quick Start Guide (QR link to full manual)
✅ Wall or Floor achor points

Manuals & Downloads

dehumidifier download user manual dehumidifiers by Ecor Pro

Why Choose EPD50-MAX?

✅ 1m (3′) / 45mm exhaust duct included
✅ External high-temp digital humidistat
✅ WiFi controller + data logger (from Nov ’24)
✅ Serial interface for network control
✅ Fused circuit protection
✅ Selectable continuous fan mode
✅ Improved energy efficiency
✅ Phased shutdown extends product life

EPD50-MAX Key Features

Condensate-free: no tank, no drains
DRYFAN® Technology: works in any position (even upside down)
Dual voltage: 110V or 220V versions with quick-change plug system
Auto restart + WiFi alerts after power loss
Continuous fan mode for constant airflow
High-temp humidistat: operates up to 40°C / 104°F
Flexible mounting: wall, floor, or ceiling
IP24 rated durable build
Wide temp range: -20°C to 40°C (-4°F to 104°F)
Quiet performance: 106 CFM / 180 m3/h at only 52 dB
10 PPI filter: washable; optional odour filters
Exhaust duct included: 1m (3′) / 45mm
Power cable: quick-swap 5m (15′) for mobility/generators

SET UP 3 PORTS VIDEOS

Airflow Specifications

Wet Air Exhaust: 35 m³/h (21 CFM)
Dry Air Output: 180 m³/h (106 CFM)
Process Air Input: 210 m³/h (124 CFM)

Optional Duct Accessories

EPDF90 flange (90mm / 3″)

Parts & Accessories

EPHUM-I-MAX WiFi Humidistat

Smart controller + data logger for remote monitoring and control.

EPHUM-I-MAX WiFi Remote Monitor & Control

Monitors

Temperature
Relative & Absolute Humidity
Dew Point
Voltage & Amperage
Power usage (kWh, job hours)
Internal hour counter

Alerts & Controls

Ice & overheat warnings
Filter cleaning alerts
Countdown timer + 365-day scheduling
High/low RH & temperature alarms
Continuous fan settings
Manual & app-based controls
Hysteresis + overheat notifications

COMES WITH Ecor Pro EPHUM-I-MAX

Free Humidistat, Data Logger and Remote Control

All Icons Shown

Main - Top

Frost warning / Temperature warning if set green on Settings page.

- Snowflake Red/White if freezing or below.
- Amber if below 5°C/41°F
- Heat Symbol Amber above 35°/95°F
- Red if above 40°C/95°F
- Hidden otherwise

THESE ARE EXTERNAL SENSOR READINGS

Filter indicator.. Countdown over 90 days. Can be reset after filter cleaning anytime.

Green/White - filter < 30 days
Green/Grey - filter 30 - 60 days
Red/White - filter needs cleaning > 90 days

TIMER FUNCTION ONLY. NOT BASED ON AIR FLOW. DATA HELD INSIDE UNIT

All Icons Shown

Main - Upper

Drop indicates humidity contol selected. Set the humidity level you wish to acheive down to be pressing the green dot next to %.

Slide to the desired level and then press confirm.

Showing status of unit on being controlled by relative humidity level (RH%)

Thermometer indicates temperature contol selected. Set the temperature to the level you want to control up to °F/°C (Setting Page selected) . Note a dehumidifier will not necessarily produce heat. Used for Ecor Pro heating appliances and selective humidity control. Select level you wish to acheive up to by pressing the green dot next to level. Higher temperature than that selected will turn unit off.

Slide to the desired level and then press Confirm.