Filtro

EPHUM-I-DRY Humidistat for EPXXX RESTO and EPXXX MAX Models

Low voltage humidistat for EPXXX RESTO & MAX units. Reguate humidity simply to desired level.  Two colour status indicator and dimable back lit brand back light..

SKU: EPHUM-I-DRY Categories: , , , , , , , Tags: ,

EPHUM-I-DRY Humidistat for EPXXX MAX and EPXXX RESTO Models

Instalado en segundos

Easy to operate. Please note there is a 5% tolerance factor built into every dehumidifier. The higher the HIGHER THE HUMIDITY % SETTING THE LESS THE DEHUMIDIFIER WILL DRY and vice-verse. At near 100% the humidistat will effectively not turn the humidistat on. At a very low setting the humidistat will effectively turn the dehumidifier on continuously.

Wall mounted with knock out entry points for cable surface mont or through rear mounting bracket for concealed wire mounting.   Bi-colour status indicator and dimable illuminated brand backlight.

El porcentaje de humedad se relaciona con el nivel de humedad relativa del aire a veces referido a un RH%.

Ideally place in the inlet air flow either on grill or in air inlet duct.   Cable for the EPHUM-I-DRY  can be extended up to 20’/7m.

Partes asociadas

Other Humidistat Types Explained

EPHUM-I-MAX – LOW VOLTAGE Used with EPXXX RESTO & EPXXX MAX models, Low voltage humidistat with 1.0m / 3″ cable. Comes fitted with RJ11 plug for inserting directly into the unit unique to Ecor Pro. Connects in 4 seconds after unit recognises humidistat device.

 

EPHUM110E – HIGH VOLTAGE Used with EPD200 / DH3500, EPD150 / DH2500 / DH2511 / DH3511, High voltage humidistat with 1.5m / 4″ cable. Comes fitted with mil standard plug that screws directly into the dehumidifiers in seconds.

Simple humidity probe can be added to ducting and in remote areas also 1.5m / 4′ long.  Plugs into EPHUM110E via a 2.5mm jack plug all provided.

EPHUM24DF – LOW VOLTAGE Used with EPD50 / DH1200, EPD30 / DH800, Low voltage humidistat with 2m / 6″ cable. Also comes fitted with a 2.5mm two pole jack plug fitted directly into the dehumidifier.

Peso 0,2 kg
Dimensiones 11,5 × 7,5 × 4,5 cm
(L x W x H)-(peso)

4.5" x 3.0" x 1.8" - 0.4 lbs
Tecnología

Humidistato
Código de barras

EAN 5060224950463
Color

Blanco
Material

Acabado plástico mate
Color / Material

Blanco/ Plástico
Tamaño de los conductos

No se aplica
Piscina lista

No
Humidistato en el interior / Opción de humidistato

No se aplica
Asa de transporte / contenedor de agua / cable de alimentación Longitud

No se aplica / No se aplica
Velocidades del ventilador / sonido

No se aplica / No se aplica
Temperatura de funcionamiento

Menos 20?C a más 40?C
Reinicio de la salida de energía / Funciona desde el cubrecorriente DC-AC

No se aplica / Sí
Flujo de aire

No se aplica

Recientemente has visto...