Filtro

Deshumidificador de Desecante EPD50 DryFan 50 Pt

120V supply 60 Hz that can be run off a 12V DC-110V AC converters , auto power reset in case of power supply interruption. Smallest 25 pints desiccant dehumidifier in the market using “3-hole” technology. Operating range from -4°F up 104°F maximum room temperature for continuous drying applications, built-in humidistat container, and an optional remote humidistat can be added by way of using a simple plug-in low voltage jack plug. Very quiet fan operation at 44dB ideal for small spaces, with 85 CFM air volume capacity (73 CFM – exhaust / 12 CFM regen air flow). Compact, all metal construction inside and outside designed for longevity, flat carrying handle that can be extended to allow easy transport and mobility, and anti-scratch four plastic feet that can be swivelled out to make four anchor points so that the unit can be mounted with suitable screws to walls/ceilings or simply fastened down onto a surface. IP24 rating which means the unit can still operate even in more damp conditions. Reticulated and easy-to-clean dust filter in metal frame to prevent particulates from entering the unit and impeding performance. Auto reset function in case of power supply interruption Duct AIR-IN option is fitted with a metal duct flange on the filter grill to allow for an external 5″ duct to draw in the air from a more remote point, concentrate the most damp air into the unit to be dried if needed. An additional flange can be added to the AIR-OUT but is not provided with the unit. Exhaust duct made easy for permanent installation by plumber or a home DIY person using standard waste pipe 1.61 inch diameter fittings. Easy repair and maintenance, fast access to replace cord sets and worn-out parts Lightweight at 14.1 lbs. and comes with 15 ft. long power cord, minimizing the use of an extension cord when placed in an area where power outlet is limited 52dB Process air in 5″ – Process air out 5″ – Exhaust air 1.5″

SKU: EPD50 Categorías: Deshumidificadores para el hogar Modelos , Deshumidificadores para el hogar , Deshumidificadores de almacenamiento y restauración los modelos, Deshumidificadores de Etiqueta:
instalar deshumidificadores deshumidificadores de Ecor Pro
deshumidificador descargar manual de usuario deshumidificadores por Ecor Pro
comparar nuestros productos deshumidificadores por Ecor Pro

Positive or Negative Focus Flood Drying

Tent can not be sealed (3-hole drying). More effective to seal the tent using a 4-hole system
Positive Pressure Splitting Dry Airflow

Positive Pressure Splitting Dry Airflow 2

Floor Flood Positive Pressure Outside Tent

Negative Pressure

Simply put the dehumidifier in the room or tent and exhaust the wet air outside of the tent or outside of the room.

How to set up a drying tent

NO SE PRODUCE AGUA. LA HUMEDAD SE VENTILA INCLUSO HACIA ARRIBA

Ideal para el secado por inundación, el mantenimiento de edificios y el almacenamiento

25 pinta Deshumidificador de desecante 110V / 60Hz

Equivalente a un deshumidificador de compresor de 50 pintas a 68°F

Libre o instalado

Industrial dehumidifier EPD50 steel construction with tough epoxy paint finish.Very small for its 25 Pint capacity. Will dry 247 and dry even down to -20°C/-4°F. Can work up to 40°C/104°F.

Steel Inside & OutTough Enough Even for Hiring or Restoration

Can be carried by one person and transported easily with the carrying handles.Self regulating energy usage that adapts to air pressure differences using always the right amount of power to dry effectively

Deshumidificador de 3 agujeros

El aire de proceso de entrada es filtrado y secado por el polvo. El aire de entrada puede ser conducido dentro y fuera con un conducto de 125 mm / 5″. La salida de aire húmedo es un conducto de 40mm / 1.5″

La investigación de Ecor Pro muestra que el EPD50 será de cuatro a siete veces más rápido en el secado de edificios a bajas temperaturas que un deshumidificador de compresor tradicional

Partes asociadas

Explicación de las características

Highly Compact – Small 25 Pint dehumidifier.

 
Dust Filter – This desiccant industrial dehumidifier benefits from a simple reticulated dust filter in a metal frame. Can be shaken clean or easily replaced to prevent dust particles entering the unit and impeding performance.
 
Easy Repair – Thus, maintenance and eventual repair have been thought through with an easy to remove cover that gives easy access to replace cord sets or warn parts by a qualified persons quickly. Prolonging the lifetime of the dehumidifier.
 
On Four Feet – Moreover, anti-scratch plastic feet that are design patented. Swivel out to provide anchor points for the dehumidifier.
 
Carrying Handle – In particular, easy to carry by one person. The handle can be removed when the product is being installed and replaced by a top lid without handle.
 
Humidistat Connection – Hence, an internal humidistat fitted and the possibility to put on an external humidistat. A jack plug connector is on the on the humidistat EPHUM24DF. Turns the dehumidifier on an off automatically. Furthermore, remotely if the dehumidifier is concealed or ducted in position.

Perfect for any climate

Conducto de entrada y salida de aire - El deshumidificador tiene todos los conductos equipados con bridas para permitir que se añadan conductos con 125 mm / 5″ conductos duros o flexibles.

 
Escape de aire húmedo - El tiene un ventilador interno. La humedad se ventila permitiendo que funcione en temperaturas más frías. La humedad es purgada del sistema por el 15% del aire de proceso, así que se secará con una ligera presión negativa.
 
“Three Hole System” – The system is classed as a “three hole” system due to the one inlet and two outlets.
 
Tenga en cuenta que los deshumidificadores EPD50 tienen una brida de salida de aire de proceso. Los modelos EPD30 no la tienen, lo que permite canalizar el aire seco hacia un espacio.
 
Power Supply – Thus, 110V supply 60Hz
 
Auto reset - Si hay una interrupción en el suministro de energía, el deshumidificador continuará funcionando tan pronto como la energía haya sido devuelta. Perfecto en lugares donde hay una fuente de alimentación "sucia" que puede afectar a otros productos controlados electrónicamente.
 
All Metal Construction – Nevertheless, all metal with epoxy paint finish heat treated for strength inside & outside. Designed for longevity.
 
5m / 15′ Power Cord – Thus, no need to join cables when placed for instance in crawl spaces or lofts in the home for example.

Dehumidifier Installation

This is a 3-Hole dehumidifier meaning that there is one  fan inside.  It is a turbo fan like the other larger units in the range.  Part of the dried process air is turned around, heated and used to purge the internal adsorption wheel of moisture that can be then vented away.

Moisture is "vented away".  No water is produced.  The moist air is vented to the outside or moved to another area that is well ventilated. Most common installation. If the machine is in the room being dried the internal humidistat can be used to regulate humidity.  If ducted and outside the room or house being dried an external humidistat may be needed.
Perfect for crawl space areas or attic areas.  Close openings to the crawl space and the unit will regulate the humidity.  Use ducting to help spread the dry air around the crawl space area.
Recirculating the air to be dried gives a compound effect and gives faster drying.  This system is a "Negative Pressure" system.   Air has to replace the air that has been exhausted.  In a normal home air is actually being replaced  frequently typically 2.5 times per hour. No home is air tight.
The dehumidifier can be hidden from sight.  It can be placed in a cupboard, in a ceiling void or under a floor.  Dry air is taken from the room, dried and then clean, dry filtered air returned.  External humidistat may be needed in that instance.

To read more about garages see here

Perfect for crawl space areas or attic areas.  Close openings to the crawl space and the unit will regulate the humidity.  Use ducting to help spread the dry air around the crawl space area.

Strong Machine Even Used For Commercial Spot Drying

The model is build to a standard that professionals can also use.  The machine is perfect for focus drying.  Wet air is focussed to where the moisture is. Example of "Positive Pressure" or forcing the dry air into areas it is needed
Having the machine in the area being dried and recirculating the air is the most efficient way of drying.  This system is "Negative Pressure. In a small enclosure, covered with plastic sheeting a frame is needed to ensure the tent maintains structure.  Rooms generally are not air tight so in larger rooms air can leak under doors etc

Used on Boats as a "Carry on" or Installed

Perfect for ducting around the boat or for area such as cabin, engine room or forward locker.  Read More

Peso 6,4 kg
Dimensiones 28 × 19 × 19 cm
(L x W x H)-(peso)

11.81" x 7.87" x 7.87" - 14.11 lbs
Tecnología

Desecante
Extracto de Max

12L-25.4pt
Alimentación / enchufe / longitud del cable

550W, 110V, 60Hz, 4.6A / Sí US
Código de barras

UPC 860001398021
Color / Material

Pintura epoyada blanca y suave de acero
Tamaño de los conductos

40mm (1.5")-125mm (5")
Piscina lista

No
Humidistato en el interior / Opción de humidistato

Sí / Sí
Asa de transporte / contenedor de agua / cable de alimentación Longitud

Sí / No / 15"
Velocidades del ventilador / sonido

1 / 52dB
Temperatura de funcionamiento

Menos 4?F a más 104?F
Reinicio de la salida de energía / Funciona desde el cubrecorriente DC-AC

Sí / Sí
Flujo de aire CFM

85
Reinicio del apagado

Sí
Trabaja desde el DC-AC Coverter

Sí
Tanque de agua

No
Material

ETL, CETL