Deshumidificador de Desecante EPD200 DryFan 200 Pt

Suministro de 120V 60 Hz que se puede hacer funcionar con un convertidor de 12V DC-110V AC, auto-reinicio de la energía en caso de interrupción del suministro de energía. Deshumidificador desecante comercial con tecnología de "4 agujeros"; extracción de agua (a 80?F / 60% RH - AHAM) - 74 pintas/día (35 litros); 95 pintas/día (46 litros) extracción máxima. Rango de funcionamiento desde -4°F hasta 10rF de temperatura ambiente máxima para aplicaciones de secado continuo, con una capacidad de volumen de aire de 309 CFM (235 CFM - extracción / 74 CFM - flujo de aire de regeneración). Funcionamiento del ventilador muy eficiente y silencioso (58dB) y, sin embargo, bajo consumo de energía en uso para una gran capacidad de extracción de humedad. El rotor desecante es el corazón del deshumidificador EPD200. Es un conjunto de membranas especialmente absorbentes dispuestas en forma de una serie de corrugaciones para dar una vasta superficie que lo convierte en un colector de humedad extremadamente eficiente. Está encapsulado en un anillo de acero galvanizado y gira sobre unidades de rodamientos de bolas selladas de alta calidad. Utiliza un calentador regenerativo de cerámica del tipo PTC (Coeficiente de Temperatura Positivo), lo que significa que el elemento calefactor nunca puede recalentarse a temperaturas peligrosas, incluso si el flujo de aire regenerativo está completamente bloqueado. Utiliza la unidad de ventilador curvado hacia atrás patentada "RadiCal", un sistema altamente eficiente pero silencioso, diseñado para proporcionar un buen equilibrio de los flujos de aire de "Proceso" y "Regeneración" El deshumidificador desecante compacto y más pequeño de su clase, puede transportarse fácilmente sin temor a que se produzcan fugas de agua después de que haya agua residual en el depósito; construcción totalmente metálica por dentro y por fuera diseñada para una mayor duración; asa de transporte extraíble para facilitar el transporte y la movilidad; y cuatro patas de plástico con clasificación IPX1 antirrayaduras, lo que significa que la unidad puede seguir funcionando incluso en condiciones más húmedas. Controles igualmente robustos pueden ser conectados a un humidistato remoto opcional o cambiados a control manual con interruptor de encendido/apagado. Medidor de amperios analógico incorporado que puede revisar el rendimiento y medir el consumo de energía; un medidor de horas que mide el número de horas que la máquina está en funcionamiento, una característica ideal para la industria del alquiler. Salida de aire húmedo con conducto de diámetro 3″ - OPCIONAL; Entrada de aire húmedo/ salida de aire seco con conducto de diámetro 5″ - opcional. 58dB Aire de proceso en 5″ - Aire de proceso de salida 5″ - Aire de escape 3″ - Aire de regeneración 3″

SKU: EPD200 Categorías: Deshumidificadores para el hogar Modelos , Deshumidificadores para el hogar , Deshumidificadores de almacenamiento y restauración los modelos, Deshumidificadores de Etiquetas: .UU., Restauración de .UU.
instalar deshumidificadores deshumidificadores de Ecor Pro
deshumidificador descargar manual de usuario deshumidificadores por Ecor Pro
comparar nuestros productos deshumidificadores por Ecor Pro

Neutral Pressure Focus Drying - FLOOD DRYING

Seal the drying tent and focus dry air saving time, money and carbon footprint
Neutral Pressure Outside

Positive Pressure Outside

Neutral Pressure Inside

How to set up a drying tent

NO SE PRODUCE AGUA. LA HUMEDAD SE EXPULSA INCLUSO HACIA ARRIBA.

Ideal Flood Dryer.  Restoration Safe.

95 Pint Desiccant Dehumidifier 110V / 60Hz.

Equivalent to a 200 Pint Compressor Dehumidifier at 65°F.

Libre o instalado.

Industrial dehumidifier EPD200 made of steel construction with tough epoxy paint finish.Very small for it’s 95 pint capacity. Will dry 24/7. Dries up to -20°C/-4°F. Can work up to 40°C/104°F.

Steel Inside & OutTough Enough Even for Hiring or Restoration

Can be carried by one person and transported easily with the carrying handles.Self-regulating energy usage that adapts to air pressure differences using always the right amount of power to dry effectively.

Deshumidificador de 4 agujeros

Input process air is dust filtered & dried. Input air can be ducted in & out with a 125mm / 5″ duct. Wet air exhaust is 80mm / 3″ duct & Regen air input also 80mm / 3″.

Ecor Pro’s research shows that the EPD200 will be 4-7x faster at drying buildings at low temperatures than a traditional compressor dehumidifiers.

Partes asociadas

Explicación de las características

Highly Compact – Very small 95 pint dehumidifier in the market.

Dust Filter – Simple reticulated dust filter in a metal frame. Shake clean or easily replaced. Prevents dust particles entering the unit and impeding performance.
Easy Repair – Easy to remove cover. Easy access to replace cord sets or warn parts by a qualified persons quickly. Prolonging the lifetime of the EPD200 dehumidifier. Cord sets can be replaced in around 20 minutes.
En Cuatro Pies - Pies de plástico anti arañazos.
Carrying Handle – Easy to carry by one person. The handles also protect the dehumidifier duct flanges if in transit.
Humidistat Connection – No integral humidistat but one can be added very simply. A military standard connector is on the front of the unit. To add this use the remote humidistat EPHUM220. This will turn the dehumidifier on an off automatically.
Conducto de entrada y salida de aire - El deshumidificador tiene todos los conductos equipados con bridas para permitir que se añadan conductos con 125 mm / 5″ conductos duros o flexibles.

Perfect for any climate

Wet Air Exhaust – The EPD200 has two internal fans compared to one in the EPD150. Both do not produce water. Vented away moisture makes it work in colder temperatures. The moisture is purged from the system by Regen air.

“Four Hole System” – Two inlets and two outlets. The four hole system can dry places pressure neutrally. Therefore, the EPD200 could used to dry large fridge freezers.
Power Supply – 110V supply 60Hz.
Auto reset - Si hay una interrupción en el suministro de energía, el EPD200 continuará funcionando tan pronto como la energía haya sido devuelta. Perfecto en lugares donde hay una fuente de alimentación "sucia" que puede afectar a otros productos controlados electrónicamente.
Construcción de metal - Todo el metal con acabado de pintura epóxica tratado térmicamente para que sea resistente por dentro y por fuera. Diseñado para la longevidad.
4m / 12′ Power Cord – No need to join cables when placed for instance in crawl spaces or lofts in the home for example.

Dehumidifier Installation

 

 

This is a 4-Hole dehumidifier meaning that there are 2 separate fans inside.  One for the Process-Air (Air that needs to be dried) and the Regen Air that is used to purge the wheel of moistures and is then vented away

Drying a water-damaged room has moved on from the days of lighting a fire and opening the doors and windows. The industry no longer leaves a dehumidifier in the middle of the flood-damaged room with a couple of air movers and hopes for the best, not least because it wastes expensive energy and because contractors are increasingly aware of the need to reduce both their carbon footprint and the time it takes to do the job.

Power availability also means more efficient products can be used on the power supply than more power hungry units.

With saving labour and making effective use of expensive assets increasingly important in a competitive market, focused or targeted drying is a good start, but as we move towards a more sustainable, cost-focused industry, it’s not enough.

Using tenting for target drying ensures the dehumidifier only dries the wet parts of the room and avoids drying unaffected areas, a process that can cause secondary damage by sucking too much moisture out of some of the materials in the rest of the room. In short, drying a whole room to remedy a flood in part of it is remarkably inefficient.

Targeted drying uses plastic sheeting to create a sealed chamber, or ‘tent’, around the wet area of the room, saving significant amounts of energy by not drying the 90% of the room that wasn’t wet in the first place - but even that approach is inefficient.

The inefficiency arises when the tent is fed from outside by the dry air from a desiccant (absorption) dehumidifier, the best choice when drying dense materials like brick or block walls.

As air is blown into the tent, the same volume of air must escape. This positive pressure system means that the drying air is taken from the whole room – as well as from outside if the windows are open. That makes the whole room part of the drying regime, with the dehumidifier forced to dry potentially damp air before putting it into the tent. If the air being fed in can’t be controlled, the drying can’t be controlled either.

The answer is to create a negative pressure system by moving the dehumidifier inside the tent, creating a controlled environment.

Let’s talk maths. In our positive system, a normal three port desiccant dehumidifier moving 150 cubic metres (5300 cft) per hour is probably generating   cubic metres (4200 cft) of dry air for drying and using 30 cubic metres (1000 cft) to dry its wheel. In a typical one cubic metre tent (35 cft) , the air is exchanged 120 times per hour, but if the tent is in a room with a total volume of 60 cubic metres (2100 cft), the air in the room outside the tent is recirculated twice, too – to no purpose.

In a negative system, the air in the tent is exchanged only 30 times but is recirculated 120 times per hour, each time becoming drier, significantly increasing the efficiency of the drying regime and reducing energy usage.

Taking this a step further, Ecor Pro’s four port DH3500/EPD200 and the EPD300 uses a separate air stream to dry its wheel, so it works at an equal pressure and air in the tent is not exchanged with the air in the room. The dehumidifier can be placed inside the tent and the ‘regen’ air to dry the wheel pumped into the tent and back out. Alternatively, the dehumidifier can be placed outside the tent and the air taken from the tent to the dehumidifier and back, which means the drying tent or chamber can be sealed around the ducts to give maximum efficiency.

Air recirculation 100%, air exchange 0%. That is efficient.

Moisture is "vented away".  No water is produced.  The moist air is vented to the outside or moved to another area that is vented. Most common installation.

Focussing the dry air gives faster drying times.  Example of "Positive Pressure" or forcing the dry air into areas it is needed

Recirculating the air to be dried gives a compound effect and gives faster drying.  This system is "Neutral Pressure" and is outside the room being dried.

Having the machine in the area being dried and recirculating the air is the most efficient way of drying.  This system is "Neutral Pressure" and is inside the room being dried.

Operating below zero and can operate in sealed rooms, 4-Hole allows even cold rooms and freezers to reduce moisture problems.

Peso 20,5 kg
Dimensiones 56,0 × 35,2 × 34,5 cm
(L x W x H)-(peso)

24.82" x 13.86" x 13.58" - 45.19lbs

Tecnología

Desecante

Extracto de Max

45L-95pt

Alimentación / enchufe / longitud del cable

1400W, 110V, 60H, 11.7A / Sí US

Código de barras

UPC 860001398069

Color / Material

Negro amarillo / pintura epoyada de acero suave

Tamaño de los conductos

80mm (3.0")-125mm (5")

Piscina lista

No

Humidistato en el interior / Opción de humidistato

No / Sí

Asa de transporte / contenedor de agua / cable de alimentación Longitud

Sí / No / 12"

Velocidades del ventilador / sonido

1 / 58dB

Temperatura de funcionamiento

Menos 4?F a más 104?F

Reinicio de la salida de energía / Funciona desde el cubrecorriente DC-AC

Sí / Sí

Flujo de aire CFM

309

Reinicio del apagado

Trabaja desde el DC-AC Coverter

Tanque de agua

No

Material

ETL, CETL

Recientemente has visto...