DH800 DryFan 8L Deshumidificador Desecante

Suministro de 220V 50 Hz que se puede hacer funcionar con un convertidor de 12V DC-220V AC o con transformadores de 110V a 220V, restablecimiento automático de la energía en caso de interrupción del suministro de energía. Deshumidificador comercial de desecante con tecnología de "3 agujeros"; extracción de agua 8 litros máximo. Rango de funcionamiento desde -20ºC hasta 40ºC de temperatura ambiente máxima para aplicaciones de secado continuo, con una capacidad de volumen de aire de 380 m3/hr (90 m3/hr - Proceso / 14m3/hr - flujo de aire de salida). Funcionamiento muy eficiente y silencioso del ventilador y, sin embargo, bajo consumo de energía en uso para una gran capacidad de extracción de humedad. 49dB Aire de proceso en 125mm - Aire de proceso en salida 125mm - Aire de escape 40mm

SKU: DH800 Categorías: Deshumidificadores EU, Deshumidificadores domésticos , Deshumidificadores domésticos EU elos, Almacenamiento los modelos, Almacenamiento Deshumidificadores EU
instalar deshumidificadores deshumidificadores de Ecor Pro
deshumidificador descargar manual de usuario deshumidificadores por Ecor Pro
comparar nuestros productos deshumidificadores por Ecor Pro

NO WATER PRODUCED. MOISTURE IS VENTED AWAY. EVEN UPWARDS.

Ideal for Flood Drying, Building Maintenance & Storage.

8 Litre Desiccant Dehumidifier 220V / 50Hz.

Equivalent to a Compressor Dehumidifier of 16 Litre @ 18°C.

Libre o instalado.

Industrial dehumidifier DH800 steel construction with tough epoxy paint finish.Very small for its 8 litre capacity. Will dry 247 and dry even down to -20°C/-4°F. Can work up to 40°C/104°F.

Steel Inside & Out.Tough Enough Even for Hiring or Restoration.

Can be carried by one person. Transported easily with removable carrying handles.Self regulating energy usage that adapts to air pressure differences using always the right amount of power to dry effectively

3 Hole Dehumidifier.

El aire de proceso de entrada es filtrado y secado por el polvo. El aire de entrada puede ser conducido dentro y fuera con un conducto de 125 mm / 5″. La salida de aire húmedo es un conducto de 40mm / 1.5″

Thus, Ecor Pro’s research shows that the DH800 will be four to seven times faster at drying buildings at low temperatures than a traditional compressor dehumidifiers

Partes asociadas

Explicación de las características

Highly Compact – Small 8 Litre dehumidifier in the market.

Dust Filter – Simple reticulated dust filter in metal frame. Shake clean or easily replaced. Prevents dust particles entering the unit and impeding performance.
Easy Repair – Maintenance and eventual repair have been thought through with an easy to remove cover that gives easy access to replace cord sets or warn parts by a qualified persons quickly. Prolonging the lifetime of the dehumidifier.
On Four Feet – Anti scratch plastic feet that are design . Patented. Swivel out to provide anchor points for the dehumidifier.
Carrying Handle – Easy to carry by one person. Removable handle for product installation. Replaced by a top lid without handle.

Humidistat Connection – There is both and internal humidistat fitted & the possibility to put on an external humidistat but one can also be added very simply. A jack plug connector is on the on the humidistat EPHUM24DF. Remotely turns the dehumidifier on an off automatically when dehumidifier is concealed or ducted in position.

Perfect for any climate.

Conducto de entrada y salida de aire - El deshumidificador tiene todos los conductos equipados con bridas para permitir que se añadan conductos con 125 mm / 5″ conductos duros o flexibles.

Wet Air Exhaust – The has one internal fan. Works in colder temperatures via vented away moisture. Moisture purged from the system by 15% of the process air. Dries with small negative pressure.
“Three Hole System” – One inlet and two outlets.
Note that the DH1200 dehumidifiers have a process air outlet flange. The DH800 models do not. Thus, dry air ducts into a space.
Power Supply – Thus, 220V supply 50Hz.
Auto reset - Si hay una interrupción en el suministro de energía, el deshumidificador continuará funcionando tan pronto como la energía haya sido devuelta. Perfecto en lugares donde hay una fuente de alimentación "sucia" que puede afectar a otros productos controlados electrónicamente.
Construcción de metal - Todo el metal con acabado de pintura epóxica tratado térmicamente para que sea resistente por dentro y por fuera. Diseñado para la longevidad.
5m / 15′ Cable de alimentación - no hay necesidad de unir los cables cuando se colocan, por ejemplo, en los espacios de descanso o en los lofts de la casa, por ejemplo.

Design Product In    (No CAD Drawing Available)

PDF Surface View

Includes Dimensions

Dehumidifier Installation

This is a 3-Hole dehumidifier meaning that there is one  fan inside.  It is a Axial fan unlike the other larger units in the range.  Axial fans have the advantage of needing less power but have less fan pressure.  Fan pressure is needed to force through ducting.  That is why there is no ducting flange on the outlet of this unit.  Part of the dried process air is turned around, heated and used to purge the internal adsorption wheel of moisture that can be then vented away.

Moisture is "vented away".  No water is produced.  The moist air is vented to the outside or moved to another area that is well ventilated. Most common installation. If the machine is in the room being dried the internal humidistat can be used to regulate humidity.  If ducted and outside the room or house being dried an external humidistat may be needed.

Perfect for crawl space areas or attic areas.  Close openings to the crawl space and the unit will regulate the humidity.  Use ducting to help spread the dry air around the crawl space area.
Recirculating the air to be dried gives a compound effect and gives faster drying.  This system is a "Negative Pressure" system.   Air has to replace the air that has been exhausted.  In a normal home air is actually being replaced  frequently typically 2.5 times per hour. No home is air tight.
The machine can just be put in any room such as a garage.  Here the larger model is shown but in smaller garages it can be sufficient.  Moisture is simply vented away.  To read more about garages see here

Used on Boats as a "Carry on" or Installed

Used in many areas on boats.  Leer más
Peso 5.5 kg
Dimensiones 34.5 × 25 × 27 cm
(L x W x H)-(peso)

7.9" x 7.9" x 7.9" - 10.58 libras

Tecnología

Desecante

Extracto de Max

8L-16.9pt

Alimentación / enchufe / longitud del cable

350W, 220V, 50Hz, 1.5A / Sí BS/EU

Código de barras

8720648456022.

Color / Material

Pintura epoyada blanca y suave de acero

Tamaño de los conductos

40mm (1.5")-125mm (5")

Piscina lista

No

Humidistato en el interior / Opción de humidistato

Sí / Sí

Asa de transporte / contenedor de agua / cable de alimentación Longitud

Sí / No / 3m

Velocidades del ventilador / sonido

1 / 49dB

Temperatura de funcionamiento

Menos 20?C a más 40?C

Reinicio de la salida de energía / Funciona desde el cubrecorriente DC-AC

Sí / Sí

Flujo de aire m3/hr

90 proceso / 14 escape

Reinicio del apagado

Trabaja desde el DC-AC Coverter

Tanque de agua

Sí 3,5 litros

Material

Acero suave recubierto de expoxy

Aprobación

CE