DH800 INOX DryFan 8L Deshumidificador de acero inoxidable

Stainless steel. 220V supply 50 Hz that can be run off a 12V DC-220V AC converters or 110V to 220V transformers, auto power reset in case of power supply interruption. “3-hole” technology commercial desiccant dehumidifier; water removal 8 litres maximum extraction. Operating range from -20°C up 40°C maximum room temperature for continuous drying applications, with 380 m3/hr air volume capacity (90 m3/hr – Process / 14m3/hr – exhaust air flow). Highly efficient, very quiet fan operation and yet low energy consumption in use for large moisture extraction capacity. 49dB Process air in 125mm – Process air out 125mm – Exhaust air 40mm

SKU: DH800INOX Categorías: Deshumidificadores de barcos modelos EU , Deshumidificadores de modelos EU, Deshumidificadores de EU, Deshumidificadores domésticos , Deshumidificadores domésticos modelos EU , Deshumidificadores de los modelos, Deshumidificadores de y restauración EU
instalar deshumidificadores deshumidificadores de Ecor Pro
deshumidificador descargar manual de usuario deshumidificadores por Ecor Pro
comparar nuestros productos deshumidificadores por Ecor Pro


Ideal para el secado por inundación, el mantenimiento de edificios y el almacenamiento

8 Deshumidificador desecante de acero inoxidable de 220V / 50Hz.

Equivalente a un deshumidificador de compresor de 16 litros a 18°C.

Libre o instalado

Industrial dehumidifier DH800 stainless steel construction .Very small for its 8 litre capacity. Will dry 24/7 and dry even down to -20°C/-4°F. Can work up to 40°C/104°F.

Stainless Steel Inside & OutTough Enough Even for Hiring or Restoration

Can be carried by one person.Transported easily with the removable carrying handles.Self regulating energy usage that adapts to air pressure differences using always the right amount of power to dry effectively.

Deshumidificador de 3 agujeros

Input process air is dust filtered & dried. Input air can be ducted in & out with a 125mm / 5″ duct. Wet air exhaust is 40mm / 1.5″ duct.

Furthermore, Ecor Pro’s research shows that the DH800 will be four to seven times faster at drying buildings at low temperatures than a traditional compressor dehumidifiers.

Partes asociadas

Explicación de las características

Highly Compact – Small 8 Litre dehumidifier in the market.

Dust Filter – Simple reticulated dust filter in metal frame. Shakened clean or easily replaced. Prevent dust particles entering the unit and impeding performance.
Easy Repair – Maintenance and eventual repair have been thought through with an. Easy to remove cover. Quickly gives easy access to replace cord sets or warn parts via a qualified persons. Prolongs the lifetime of the dehumidifier.
On Four Feet – Design patented anti scratch plastic feet. Swivel out to provide. Anchor points for the dehumidifier.
Carrying Handle – Removable handle. Easy to carry by one person. Replaced by a top lid without handle, if needed.

Humidistat Connection – There is both and internal humidistat fitted & the possibility to put on an external humidistat but one can also be added very simply. A jack plug connector is on the on the humidistat EPHUM24DF. This will turn the dehumidifier on an off automatically remotely if the dehumidifier is concealed or ducted in position.

Perfect for any climate.

Conducto de entrada y salida de aire - El deshumidificador tiene todos los conductos equipados con bridas para permitir que se añadan conductos con 125 mm / 5″ conductos duros o flexibles.

Wet Air Exhaust – The has one internal fan. The moisture is vented away allowing it to work in colder temperatures. Moisture purged from the system by 15% of the process air. Dries with small negative pressure.
“Three Hole System” – One inlet and two outlets.Note that the DH12XX dehumidifiers have a process air outlet flange. The DH8XX models do not. Thus, dry air can be ducted into a space.
Power Supply – Thus, 220V supply 50Hz
Auto reset - Si hay una interrupción en el suministro de energía, el deshumidificador continuará funcionando tan pronto como la energía haya sido devuelta. Perfecto en lugares donde hay una fuente de alimentación "sucia" que puede afectar a otros productos controlados electrónicamente.
Construcción totalmente de metal - Todo el metal de acero inoxidable por dentro y por fuera. Diseñado para la longevidad.
5m / 15′ Power Cord – No need to join cables when placed for instance in crawl spaces or lofts in the home for example.

Dehumidifier Installation

This is a 3-Hole dehumidifier meaning that there is one  fan inside.  It is a Axial fan unlike the other larger units in the range.  Axial fans have the advantage of needing less power but have less fan pressure.  Fan pressure is needed to force through ducting.  That is why there is no ducting flange on the outlet of this unit.  Part of the dried process air is turned around, heated and used to purge the internal adsorption wheel of moisture that can be then vented away.

Moisture is "vented away".  No water is produced.  The moist air is vented to the outside or moved to another area that is well ventilated. Most common installation. If the machine is in the room being dried the internal humidistat can be used to regulate humidity.  If ducted and outside the room or house being dried an external humidistat may be needed.

Perfect for crawl space areas or attic areas.  Close openings to the crawl space and the unit will regulate the humidity.  Use ducting to help spread the dry air around the crawl space area.
Recirculating the air to be dried gives a compound effect and gives faster drying.  This system is a "Negative Pressure" system.   Air has to replace the air that has been exhausted.  In a normal home air is actually being replaced  frequently typically 2.5 times per hour. No home is air tight.
The machine can just be put in any room such as a garage.  Here the larger model is shown but in smaller garages it can be sufficient.  Moisture is simply vented away.  To read more about garages see here

Used on Boats as a "Carry on" or Installed

Used in many areas on boats.  Leer más
Peso 5.5 kg
Dimensiones 34.5 × 26 × 27 cm
(L x W x H)-(peso)

7.9" x 7.9" x 7.9" - 10.58 libras



Extracto de Max


Alimentación / enchufe / longitud del cable

350W, 220V, 50Hz, 1.5A / Sí BS/EU

Código de barras


Color / Material

Acero inoxidable

Tamaño de los conductos

40mm (1.5")-125mm (5")

Piscina lista


Humidistato en el interior / Opción de humidistato

Sí / Sí

Asa de transporte / contenedor de agua / cable de alimentación Longitud

Sí / No / 3m

Velocidades del ventilador / sonido

1 / 49dB

Temperatura de funcionamiento

Menos 20?C a más 40?C

Reinicio de la salida de energía / Funciona desde el cubrecorriente DC-AC

Sí / Sí

Flujo de aire m3/hr

90 proceso / 14 escape

Reinicio del apagado

Trabaja desde el DC-AC Coverter

Tanque de agua



Acero inoxidable