DH2500 INOX DryFan 35L Deshumidificador de acero inoxidable

Stainless steel. 220V supply 50 Hz that can be run off a 12V DC-220V AC converters or 110V to 220V transformers, auto power reset in case of power supply interruption. “3-hole” technology commercial desiccant dehumidifier; water removal 35 litres maximum extraction. Operating range from -20°C up 40°C maximum room temperature for continuous drying applications, with 380 m3/hr air volume capacity (380 m3/hr – Process / 75m3/hr – exhaust air flow). Highly efficient, very quiet fan operation and yet low energy consumption in use for large moisture extraction capacity. 56dB Process air in 125mm – Process air out 125mm – Exhaust air 80mm

SKU: DH2500INOX Categorías: Deshumidificadores de barcos modelos , Deshumidificadores de modelos EU, Deshumidificadores de EU, Deshumidificadores de los modelos, Deshumidificadores de EU Etiquetas: , Restauración
instalar deshumidificadores deshumidificadores de Ecor Pro
deshumidificador descargar manual de usuario deshumidificadores por Ecor Pro
comparar nuestros productos deshumidificadores por Ecor Pro

Positive or Negative Focus Flood Drying

Tent can not be sealed (3-hole drying). More effective to seal the tent using a 4-hole system
Positive Splitting Dry Airflow

Positive Pressure Splitting Dry Airflow 2

Negative Pressure Inside

How to set up a drying tent

NO WATER PRODUCED. MOISTURE IS VENTED AWAY. EVEN UPWARDS.

Se utiliza para la restauración, buques de mar e industrias de catering.

35 Litre Desiccant Dehumidifier 220V / 50Hz.

Equivalent to a 70 Litre Compressor Dehumidifier @18°C.

Libre o instalado.

Industrial dehumidifier DH2500 INOX stainless steel construction.Very small for its 35 litre capacity. Will dry 24/7 and dry even down to -20°C/-4°F. Can work up to 40°C/104°F.

Stainless Steel Inside & Out.Tough Enough Even for Hiring or Restoration.

Carried by one person and transported easily with the carrying handles.Self regulating energy usage that adapts to air pressure differences using always the right amount of power to dry effectively

3 Hole Dehumidifier.

El aire de proceso de entrada es filtrado y secado por el polvo. El aire de entrada puede ser conducido dentro y fuera con un conducto de 125 mm / 5″. La salida de aire húmedo es un conducto de 80mm / 3″

La investigación de Ecor Pro muestra que el DH2500 INOX será de cuatro a siete veces más rápido en el secado de edificios a bajas temperaturas que un deshumidificador de compresor tradicional

Partes asociadas

Explicación de las características

Highly Compact – Small 35 litre dehumidifier in the market.

 
Dust Filter – Simple reticulated dust filter in metal frame that can be shaken clean or easily replaced to prevent dust particles entering the unit and impeding performance.
 
Easy Repair – Easy to remove cover for maintenance and eventual repair. Easy access to replace cord sets or warn parts via qualified persons. Prolonging the lifetime of the DH2500 INOX dehumidifier. Cord sets can be replaced in around 20 minutesOn Four Feet – Anti scratch plastic feet.
 
Carrying Handle – Easy to carry by one person. The removable handles also protect the dehumidifier duct flanges if in transit.
 
Humidistat Connection – There is no integral humidistat but one can be added very simply. A military standard connector is on the front of the unit.To add this use the remote humidistat EPHUM220.This will turn the dehumidifier on an off automatically.
 
Conducto de entrada y salida de aire - El deshumidificador tiene todos los conductos equipados con bridas para permitir que se añadan conductos con 125 mm / 5″ conductos duros o flexibles.

Perfect for any climate.

Wet Air Exhaust – The DH2500 INOX has one internal fan compared to two in the DH3500 INOX. Both do not produce water. Work in colder temperatures via vented away moisture. Moisture purged from the system by 15% of the process air. Dried with small negative pressure.

 
“Three Hole System” – One inlet and two outlets. Used as a four hole industrial dehumidifier via slight duct configuration and accurate duct flow measurement.  DH3500 INOX an easier alternative if concerned.
 
Power Supply – 220V supply 50Hz industrial dehumidifier.
 
Auto reset - Si hay una interrupción en el suministro de energía, el DH2500 INOX continuará funcionando tan pronto como la energía haya sido devuelta. Perfecto en lugares donde hay una fuente de alimentación "sucia" que puede afectar a otros productos controlados electrónicamente.
 
Construcción de metal - Todo el metal con acabado de pintura epóxica tratado térmicamente para que sea resistente por dentro y por fuera. Diseñado para la longevidad.
 
5m / 15′ Cable de alimentación - no hay necesidad de unir los cables cuando se colocan, por ejemplo, en los espacios de descanso o en los lofts de la casa, por ejemplo.

Dehumidifier Installation

 

 

This is a 3-Hole dehumidifier meaning that there is one  fan inside.  Part of the dried process air is turned around, heated and used to purge the internal adsorption wheel of moisture that can be then vented away.

Moisture is "vented away".  No water is produced.  The moist air is vented to the outside or moved to another area that is ventilated. Most common installation.

Focussing the dry air gives faster drying times.  Example of "Positive Pressure" or forcing the dry air into areas it is needed
Recirculating the air to be dried gives a compound effect and gives faster drying.  This system is a "Negative Pressure" system.   Air has to replace the air that has been exhausted with the wet air.

15% of the air that is processed is expelled as wet air.  This air needs to be replaced.  Air from outside the room may be more humid.  This is averted with a larger model.

Having the machine in the area being dried and recirculating the air is the most efficient way of drying.  This system is "Negative Pressure. In a small enclosure, covered with plastic sheeting a frame is needed to ensure the tent maintains structure.  Rooms generally are not air tight so in larger rooms air can leak under doors etc

3-hole systems have one advantage over 4-Hole systems.  Around 60 Watts of energy will be retained in the process air flow with a 4-Hole system.  Normally this is not a problem (Same energy as an old home light bulb) but if it is a variable air valve may be added to balance the system with regen air. 

This assumes that the air from any variable inlet (variable in order to find balance of air flow) is colder than the air inside the room being dried.   Typical applications will include  buildings where heat generated by people is not covered fully by any air conditioning.

Peso 19.8 kg
Dimensiones 55 × 41 × 47 cm
(L x W x H)-(peso)

17.52" x 13.86" x 13.58" - 38.58lbs

Tecnología

Desecante

Extracto de Max

35L-74pt

Alimentación / enchufe / longitud del cable

900W, 220V, 50Hz, 3.5A / Sí BS/EU

Código de barras

8720648456077.

Color / Material

Acero inoxidable

Tamaño de los conductos

80mm (3.0")-125mm (5")

Piscina lista

No

Humidistato en el interior / Opción de humidistato

No / Sí

Asa de transporte / contenedor de agua / cable de alimentación Longitud

Sí / No / 5

Velocidades del ventilador / sonido

1 / 56dB

Temperatura de funcionamiento

Menos 20?C a más 40?C

Reinicio de la salida de energía / Funciona desde el cubrecorriente DC-AC

Sí / Sí

Flujo de aire m3/hr

380 proceso / 75 escape

Reinicio del apagado

Trabaja desde el DC-AC Coverter

Tanque de agua

No

Material

Acero inoxidable

Aprobación

CE

Recientemente has visto...