Garajes para coches
Proteja su vehículo incluso por debajo de los cero grados contra el óxido
USA / CA Products
UK/EU/AUS Products
Product Accessories
Install Guides
Compare Us
The Ecor Pro EPHUM-I-MAX sensor App puts you in control of the device. Used to control multiple Ecor Pro products. Weekly schedule and real time power data performance. Ideal for the professional user for Homes or the Workplace.
See how to connect HERE
Main Page
All Icons Shown
Main - Top
Your standard phone status bar. Not part of the App.
Device name. This can be changed by clicking on the pencil symbol to identify the device. Unlimited number of devices can be controled with one phone or linked wto computer with specialised serial interface.
Clicking on the logo will take you to the Ecor Pro website
Link to the Ecor Pro Page for trouble shooting faults.
Only appears when an internal device fault causes overheating
Frost warning / Temperature warning if set green on Settings page.
- Snowflake Red/White if freezing or below.
- Amber if below 5°C/41°F
- Heat Symbol Amber above 35°/95°F
- Red if above 40°C/95°F
- Hidden otherwise
THESE ARE EXTERNAL SENSOR READINGS
Filter indicator.. Countdown over 90 days. Can be reset after filter cleaning anytime.
Green/White - filter < 30 days
Green/Grey - filter 30 - 60 days
Red/White - filter needs cleaning > 90 days
TIMER FUNCTION ONLY. NOT BASED ON AIR FLOW. DATA HELD INSIDE UNIT
Alarm for humidity or temperature warning set on the Settings page.
Either temperature or humidity is too High (Hi) or too Low (Lo)
The cog symbol will take you to the settings page
All Icons Shown
Main - Upper
Drop indicates humidity contol selected. Set the humidity level you wish to acheive down to be pressing the green dot next to %.
Slide to the desired level and then press confirm.
Showing status of unit on being controlled by relative humidity level (RH%)
Thermometer indicates temperature contol selected. Set the temperature to the level you want to control up to °F/°C (Setting Page selected) . Note a dehumidifier will not necessarily produce heat. Used for Ecor Pro heating appliances and selective humidity control. Select level you wish to acheive up to by pressing the green dot next to level. Higher temperature than that selected will turn unit off.
Slide to the desired level and then press Confirm.
Status unit on controlled by temperature level.
Up to 24 Hour count down indicator in hour & minutes. Whole hours can be selected from.
Clicking on coundown button lets you select up to 24 hours of operation before shut down. Unit must be in an ON sate prior.
Click to enlarge
Cancel by selecting zero hours and confirm.
Relative Humidity % reading of external sensor. To get a true accuracy put the sensor in the air flow using the clips provided attaching to the outside inlet grill.
EXTERNAL SENSOR READINGS
Temperature reading of sensor. To get a true accuracy put the sensor in the air flow using the clips provided. Temperature can be in °F/°C by selecting on the settings page.
EXTERNAL SENSOR READINGS
All Icons Shown
Main - Lower
All data page.
Click to enlarge
Absolute humidity and dew point graphs over time. In Grains/Pound (if Imperial selected or Grams/Kilogram if Metric Selected.
Click to enlarge
Job kWH and Amps used graphs
Click to enlarge
Relative Humidity and Temperature in °F or °C graphs.
Click to enlarge
Create multiple timer events to switch on / off the appliance which overight other settings.
Click to enlarge
Click to enlarge
Up to 24 Hour count down indicator in hour & minutes. Whole hours can be selected from.
Clicking on coundown button lets you select up to 24 hours of operation before shut down if already ON.
Click to enlarge
Cancel by selecting zero hours and Confirm.
Link to Settings and Alarm page.
All Icons Shown
Main - Bottom
Temperature, Manual or Humidity operation modes.
Unit and app linked but not in operation.
Continuos fan selected on App or selected on unit.
Investigate unit air flow and temperature. Do not ignore!
INTERNAL OVERHEAT!
Settings Page
All Icons Shown
Settings - Top
Device name. This can be changed by clicking on the pencil symbol to identify device in the Tuya management page. Unlimited number of devices can be controled with one phone
Link to the Tuya management page.
Click to enlarge
You can pass control of the device to another, rename, remove it or turn off/on notifications.
The Home symbol will take you to the main page
Frost warning / Temperature warning if set green on Settings page.
-
Snowflake Red/White if freezing or below.
-
Amber if below 5°C/41°F
-
Heat Symbol Amber above 35°/95°F
-
Red if above 40°C/95°F
Hidden otherwise
EXTERNAL SENSOR READINGS
Filter indicator.. Countdown over 90 days. Can be reset after filter cleaning anytime.
Green/White - filter < 30 days
Green/Grey - filter 30 - 60 days
Red/White - filter needs cleaning > 90 days
Alarm for humidity or temperature warning set on the Settings page.
Either temperature humidity too High (Hi) or too Low (Lo)
All Icons Shown
Settings - Upper
Reset Job hours and Job kWh (kilo Watt hours)
Click to enlarge actual screen shot
Resides values to zero on all screens
Input alarm values to warn or high (Hi) Relative Humidity (RH) levels or of low humidity levels (Lo).
This is not related to Absolute Humidity levels & the degree level of Hysteresis
Hysteresis level selector. Note alarms will turn off when one degree less than the set value is hysteresis is set to Zero
Click to enlarge actual screen shot
Same principle applies when working with Temperature control. Vaues change if working in °F or °C and the level of Hysteresis will affect alarm notifications. Hysteresis is especially useful if Hi & Lo alarms are close to prevent unecessary notifications.
Input alarm values to warn or high (Hi) humidity levels or of low humidity levels (Lo)
Values change if working in °F or °C and the level of Hysteresis will affect.
All Icons Shown
Settings - Bottom
A moving graphic will be seen under the ON/OFF button if the Continuous Fan option has been selected on the unit itself.
Moving graphic in power area means on and communication with unit
Canging units between °C & °F will not only mean temperature units change including Dew Point. Also Absolute Humidity units will change from Grams per Kilogram of air (°C metric) to Grains per Pound of air (°F imperial). On Graph pages you can swap still between imperial and metric displays.
Hysteresis slider. set between zero and 10. How it influences the workings of the units is deal with above.
Whenever you clean the filter, the counter is reset here
Click to enlarge actual screen shot
Historical log of when the appliance has been turned on and off.
Click to enlarge actual screen shot
Turn frost alert (and high temperature alert) off and on. Descriibe in Main Screen guide. Gives warnings on all screens (except graph screens) if temperatures approach freezing or high temperatures to 40°C / 100°F. This is to prevent frost damage (if applicable) and safe running of the unit.
Auto or continuous fan. When first loading the app select a auto or continuos as initial status neither are selected.
Even if unit is turned off (Red) and continuous can is selected on the appliance or app the fan will keep running but there will be no heating or dehumidification.
Link to take you to ecor pro fault finding page on www.ecor-pro.com