EPD150-PRO DryFan 150 Pt Deshumidificador de Desecante de Acero Inoxidable

Suministro de 120V 60 Hz que se puede hacer funcionar con un convertidor de 12V DC-110V AC (opción de 220V), restablecimiento automático de la energía en caso de interrupción del suministro de energía. Deshidratador comercial de 74 pintas (35 litros) con tecnología de "3 agujeros". Rango de funcionamiento desde -4?F hasta 104?F de temperatura ambiente máxima para aplicaciones de secado continuo, con una capacidad de volumen de aire de 267 CFM (223 CFM - escape / 44 CFM - flujo de aire de regeneración). Funcionamiento del ventilador muy eficiente y silencioso (49dB) y, sin embargo, bajo consumo de energía en uso para una gran capacidad de extracción de humedad. 56dB Aire de proceso en 5″ - Aire de proceso en salida 5″ - Aire de escape 3″

SKU: EPD150-PRO Categorías: Deshumidificadores de barcos Modelos , Deshumidificadores de barcos Modelos , Deshumidificadores de los modelos, Deshumidificadores de Etiquetas: .UU., Restauración de .UU.
instalar deshumidificadores deshumidificadores de Ecor Pro
deshumidificador descargar manual de usuario deshumidificadores por Ecor Pro
comparar nuestros productos deshumidificadores por Ecor Pro

Positive or Negative Focus Flood Drying

Tent can not be sealed (3-hole drying). More effective to seal the tent using a 4-hole system
Positive Splitting Dry Airflow

Positive Pressure Splitting Dry Airflow 2

Negative Pressure Inside

How to set up a drying tent

NO SE PRODUCE AGUA. LA HUMEDAD SE VENTILA INCLUSO HACIA ARRIBA

Se utiliza para la restauración, buques de mar e industrias de catering.

74 pinta Deshumidificador de desecante 110V / 60Hz

Equivalente a un deshumidificador de compresor de 150 pinta a 65°F

Libre o instalado

Industrial dehumidifier EPD150 PRO stainless steel construction.Very small for its 74 pint capacity. Will dry 24/7 and dry even down to -20°C/-4°F. Can work up to 40°C/104°F.

Stainless Steel Inside & OutTough Enough Even for Hiring or Restoration

Can be carried by one person and transported easily with the carrying handles.Self regulating energy usage that adapts to air pressure differences using always the right amount of power to dry effectively

Deshumidificador de 3 agujeros

El aire de proceso de entrada es filtrado y secado por el polvo. El aire de entrada puede ser conducido dentro y fuera con un conducto de 125 mm / 5″. La salida de aire húmedo es un conducto de 80mm / 3″

La investigación de Ecor Pro muestra que el EPD150 PRO será de cuatro a siete veces más rápido en el secado de edificios a bajas temperaturas que un deshumidificador de compresor tradicional

Partes asociadas

Explicación de las características

Highly Compact – Small 74 pint dehumidifier in the market.

 
Dust Filter – Simple reticulated dust filter in a metal frame. Shakened clean or easily replaced. Prevents dust particles entering the unit and impeding performance.
 
Fácil reparación - El mantenimiento y la eventual reparación han sido pensados con una cubierta fácil de quitar que permite un fácil acceso para reemplazar los juegos de cables o advertir a las partes por parte de una persona calificada rápidamente. Prolongando la vida útil del deshumidificador EPD150. Los juegos de cables pueden ser reemplazados en unos 20 minutos
 
En Cuatro Pies - Pies de plástico anti arañazos.
 
Carrying Handle – Easy to carry by one person. The handles also protect the dehumidifier duct flanges if in transit.
 
Humidistat Connection – There is no integral humidistat but one can be added very simply. A military standard connector is on the front of the unit.To add this use the remote humidistat EPHUM220.This will turn the dehumidifier on an off automatically.
 
Conducto de entrada y salida de aire - El deshumidificador tiene todos los conductos equipados con bridas para permitir que se añadan conductos con 125 mm / 5″ conductos duros o flexibles.

Perfect for any climate.

Wet Air Exhaust – The EPD150 has one internal fan compared to two in the EPD200. Both do not produce water. The moisture is vented away allowing it to work in colder temperatures. The moisture is purged from the system by 15% of the process air. Dries with a small negative pressure.

 
“Three Hole System” – One inlet and two outlets. Can be used as a four hole industrial dehumidifier via duct configuration.  If this is a concern then the EPD200 is an easier alternative
 
Suministro de energía - Suministro de 110V 60Hz
 
Auto reset - Si hay una interrupción en el suministro de energía, el EPD150 continuará funcionando tan pronto como la energía haya sido devuelta. Perfecto en lugares donde hay una fuente de alimentación "sucia" que puede afectar a otros productos controlados electrónicamente.
 
Construcción de metal - Todo el metal con acabado de pintura epóxica tratado térmicamente para que sea resistente por dentro y por fuera. Diseñado para la longevidad.
 
5m / 15′ Cable de alimentación - no hay necesidad de unir los cables cuando se colocan, por ejemplo, en los espacios de descanso o en los lofts de la casa, por ejemplo.

Dehumidifier Installation

 

 

This is a 3-Hole dehumidifier meaning that there is one  fan inside.  Part of the dried process air is turned around, heated and used to purge the internal adsorption wheel of moisture that can be then vented away.

Moisture is "vented away".  No water is produced.  The moist air is vented to the outside or moved to another area that is ventilated. Most common installation.

Focussing the dry air gives faster drying times.  Example of "Positive Pressure" or forcing the dry air into areas it is needed
Recirculating the air to be dried gives a compound effect and gives faster drying.  This system is a "Negative Pressure" system.   Air has to replace the air that has been exhausted with the wet air.

15% of the air that is processed is expelled as wet air.  This air needs to be replaced.  Air from outside the room may be more humid.  This is averted with a larger model.

Having the machine in the area being dried and recirculating the air is the most efficient way of drying.  This system is "Negative Pressure. In a small enclosure, covered with plastic sheeting a frame is needed to ensure the tent maintains structure.  Rooms generally are not air tight so in larger rooms air can leak under doors etc

3-hole systems have one advantage over 4-Hole systems.  Around 60 Watts of energy will be retained in the process air flow with a 4-Hole system.  Normally this is not a problem (Same energy as an old home light bulb) but if it is a variable air valve may be added to balance the system with regen air. 

This assumes that the air from any variable inlet (variable in order to find balance of air flow) is colder than the air inside the room being dried.   Typical applications will include  buildings where heat generated by people is not covered fully by any air conditioning.

Peso 17,5 kg
Dimensiones 56 × 35.2 × 34.5 cm
(L x W x H)-(peso)

17.52" x 13.86" x 13.58" - 38.58lbs

Tecnología

Desecante

Extracto de Max

35L-74pt

Alimentación / enchufe / longitud del cable

850W, 110V, 60Hz, 7.1A / Sí US

Código de barras

UPC 860001398052

Color / Material

Acero inoxidable

Tamaño de los conductos

80mm (3.0")-125mm (5")

Piscina lista

No

Humidistato en el interior / Opción de humidistato

No / Sí

Asa de transporte / contenedor de agua / cable de alimentación Longitud

Sí / No / 15"

Velocidades del ventilador / sonido

1 / 56dB

Temperatura de funcionamiento

Menos 4?F a más 104?F

Reinicio de la salida de energía / Funciona desde el cubrecorriente DC-AC

Sí / Sí

Flujo de aire CFM

267

Reinicio del apagado

Trabaja desde el DC-AC Coverter

Tanque de agua

No

Material

ETL, CETL

Recientemente has visto...