EPD30 DryFan 30 Pt Trockenmittel-Luftentfeuchter

120V supply 60 Hz that can be run off a 12V DC-110V AC converters , auto power reset in case of power supply interruption. Smallest 16 pints desiccant dehumidifier in the market using “3-hole” technology. Operating range from -4?F up 104°F maximum room temperature for continuous drying applications, built-in humidistat container, and an optional remote humidistat can be added by way of using a simple plug-in low voltage jack plug. Very quiet fan operation at 40dB ideal for small spaces, with 61 CFM air volume capacity (53 CFM – exhaust / 8 CFM regen air flow). Compact, all metal construction inside and outside designed for longevity, flat carrying handle that can be extended to allow easy transport and mobility, and anti-scratch four plastic feet that can be swivelled out to make four anchor points so that the unit can be mounted with suitable screws to walls/ceilings or simply fastened down onto a surface. IP24 rating which means the unit can still operate even in more damp conditons. Reticulated and easy-to-clean dust filter in metal frame to prevent particulates from entering the unit and impeding performance. Auto reset function in case of power supply interruption Duct AIR-IN option is fitted with a metal duct flange on the filter grill to allow for an external 5″ inch duct to draw in the air from a more remote point, concentrate the most damp air into the unit to be dried if needed. An additional flange can be added to the AIR-OUT but is not provided with the unit. 0 Easy repair and maintenance, fast access to replace cord sets and worn-out parts Lightweight at 11 lbs. and comes with 15 ft. long power cord, minimizing the use of an extension cord when placed in an area where power outlet is limited 49dB Process air in 5″ – Exhaust air 1.5″

Luftentfeuchter installieren Luftentfeuchter von Ecor Pro
Luftentfeuchter Download Benutzerhandbuch Luftentfeuchter von Ecor Pro
vergleichen Sie unsere Produkte Luftentfeuchter von Ecor Pro


Ideal for Flood Drying, Building Maintenance & Storage.

17 Pint Desiccant Dehumidifier 110V / 60Hz.

Equivalent to a Compressor Dehumidifier of 30 Pints @ 68°F.

Freistehend oder installiert.

Industrial dehumidifier EPD30 steel construction with tough epoxy paint finish.Very small for its 17 Pint capacity. Dries 24/7. Dries down to -20°C/-4°F. Works up to 40°C/104°F.

Steel Inside & Out.Tough Enough Even for Hiring or Restoration.

Can be carried by one person. Transported easily with removable carrying handles.Self regulating energy usage. Adapts to air pressure differences. Always the right amount of power to dry effectively.

3 Hole Dehumidifier.

Die eingehende Prozessluft ist staubgefiltert und getrocknet. Die Eingangsluft kann mit einem 125 mm / 5″-Kanal ein- und ausgeleitet werden. Die Nassluftabfuhr erfolgt über einen 40 mm / 1,5″-Kanal.

Ecor Pro’s research shows that the EPD30 will be 4-7 x faster at drying buildings at low temperatures than a traditional compressor dehumidifiers.

Zugehörige Teile

Erklärte Merkmale

Highly Compact – Very small 17 Pint dehumidifier in the market.

Dust Filter – Simple reticulated dust filter in metal frame. Shakened clean or easily replaced. Prevents dust particles entering the unit and impeding performance
Easy Repair – Maintenance and eventual repair have been thought through with an easy to remove cover that gives easy access to replace cord sets or warn parts by a qualified persons quickly. Prolonging the lifetime of the dehumidifier.
On Four Feet – Anti scratch plastic feet that are design Patented. Swivel out to provide anchor points for the dehumidifier.
Carrying Handle – Easy to carry by one person. The handle can be removed if the product is being installed and replaced by a top lid without handle.
Humidistat Connection – There is both and internal humidistat fitted & the possibility to put on an external humidistat but one can also be added very simply. A jack plug connector is on the on the humidistat EPHUM24DF. This will turn the dehumidifier on an off automatically remotely if the dehumidifier is concealed or ducted in position.

Perfekt für jedes Klima.

Duct Air-In & Out - Der Luftentfeuchter hat alle Kanäle mit Flanschen versehen, so dass Kanäle mit 125mm / 5″ harten oder flexiblen Kanälen hinzugefügt werden können.

Nassluftabzug - Der hat einen internen Ventilator. Die Feuchtigkeit wird abgeführt, so dass er auch bei kälteren Temperaturen arbeiten kann. Die Feuchtigkeit wird durch 15% der Prozessluft aus dem System gespült, so dass sie bei leichtem Unterdruck trocknet.
“Three Hole System” – The system is classed as a “three hole” system due to the one inlet and two outlets.
Note that the EPD50 dehumidifiers have a process air outlet flange. The EPD30 models do not. This allows dry air to be ducted into a space.
Stromversorgung - 110V-Versorgung 60Hz
Auto Reset - Bei einer Unterbrechung der Stromversorgung setzt der Luftentfeuchter seinen Betrieb fort, sobald die Stromversorgung wieder hergestellt wurde. Perfekt an Orten, an denen eine "schmutzige" Stromversorgung vorhanden ist, die andere elektronisch gesteuerte Produkte beeinträchtigen kann.
Ganzmetallkonstruktion - Ganzmetall mit Epoxidlackierung, wärmebehandelt für Festigkeit innen und außen. Ausgelegt für Langlebigkeit.
5m / 15′ Netzkabel - keine Notwendigkeit, Kabel zu verbinden, wenn sie z.B. in Kriechräumen oder Lofts in der Wohnung verlegt werden.

Dehumidifier Installation

This is a 3-Hole dehumidifier meaning that there is one  fan inside.  It is a Axial fan unlike the other larger units in the range.  Axial fans have the advantage of needing less power but have less fan pressure.  Fan pressure is needed to force through ducting.  That is why there is no ducting flange on the outlet of this unit.  Part of the dried process air is turned around, heated and used to purge the internal adsorption wheel of moisture that can be then vented away.

Moisture is "vented away".  No water is produced.  The moist air is vented to the outside or moved to another area that is well ventilated. Most common installation. If the machine is in the room being dried the internal humidistat can be used to regulate humidity.  If ducted and outside the room or house being dried an external humidistat may be needed.

Perfect for crawl space areas or attic areas.  Close openings to the crawl space and the unit will regulate the humidity.  Use ducting to help spread the dry air around the crawl space area.
Recirculating the air to be dried gives a compound effect and gives faster drying.  This system is a "Negative Pressure" system.   Air has to replace the air that has been exhausted.  In a normal home air is actually being replaced  frequently typically 2.5 times per hour. No home is air tight.
The machine can just be put in any room such as a garage.  Here the larger model is shown but in smaller garages it can be sufficient.  Moisture is simply vented away.  To read more about garages see here

Used on Boats as a "Carry on" or Installed

Used in many areas on boats.  Lesen Sie mehr
Gewicht 4,8 kg
Abmessungen 19 × 19 × 19 cm
(L x B x H)-(Gewicht)

7,87" x 7,87" x 7,87" - 10,58 lbs



Maximaler Auszug


Leistung / Stecker / Kabellänge

350W, 110V, 60Hz, 2,9A / Ja US


UPC 860001398007

Farbe / Material

Weiß / Weichstahl Epochenfarbe


40mm (1,5")-125mm (5")

Schwimmbad bereit


Humidistat Innen / Humidistat Option

Ja / Ja


Ja / Nein / 15"


1 / 49dB

Temperatur öffnen

Minus 4?F bis plus 104?F

Neustart bei Stromausfall / Funktioniert vom DC-AC Coverter

Ja / Ja

Luftstrom CFM


Neustart bei Stromausfall


Werke von DC-AC Coverter