EPD50 DryFan 50 Pt Trockenmittel-Luftentfeuchter

120V supply 60 Hz that can be run off a 12V DC-110V AC converters , auto power reset in case of power supply interruption. Smallest 25 pints desiccant dehumidifier in the market using “3-hole” technology. Operating range from -4°F up 104°F maximum room temperature for continuous drying applications, built-in humidistat container, and an optional remote humidistat can be added by way of using a simple plug-in low voltage jack plug. Very quiet fan operation at 44dB ideal for small spaces, with 85 CFM air volume capacity (73 CFM – exhaust / 12 CFM regen air flow). Compact, all metal construction inside and outside designed for longevity, flat carrying handle that can be extended to allow easy transport and mobility, and anti-scratch four plastic feet that can be swivelled out to make four anchor points so that the unit can be mounted with suitable screws to walls/ceilings or simply fastened down onto a surface. IP24 rating which means the unit can still operate even in more damp conditions. Reticulated and easy-to-clean dust filter in metal frame to prevent particulates from entering the unit and impeding performance. Auto reset function in case of power supply interruption Duct AIR-IN option is fitted with a metal duct flange on the filter grill to allow for an external 5″ duct to draw in the air from a more remote point, concentrate the most damp air into the unit to be dried if needed. An additional flange can be added to the AIR-OUT but is not provided with the unit. Exhaust duct made easy for permanent installation by plumber or a home DIY person using standard waste pipe 1.61 inch diameter fittings. Easy repair and maintenance, fast access to replace cord sets and worn-out parts Lightweight at 14.1 lbs. and comes with 15 ft. long power cord, minimizing the use of an extension cord when placed in an area where power outlet is limited 52dB Process air in 5″ – Process air out 5″ – Exhaust air 1.5″

Luftentfeuchter installieren Luftentfeuchter von Ecor Pro
Luftentfeuchter Download Benutzerhandbuch Luftentfeuchter von Ecor Pro
vergleichen Sie unsere Produkte Luftentfeuchter von Ecor Pro

Positive or Negative Focus Flood Drying

Tent can not be sealed (3-hole drying). More effective to seal the tent using a 4-hole system
Positive Pressure Splitting Dry Airflow

Positive Pressure Splitting Dry Airflow 2

Floor Flood Positive Pressure Outside Tent

Negative Pressure

Simply put the dehumidifier in the room or tent and exhaust the wet air outside of the tent or outside of the room.

How to set up a drying tent

KEIN WASSER PRODUZIERT. FEUCHTIGKEIT WIRD AUCH NACH OBEN ABGEFÜHRT

Ideal für Hochwassertrocknung, Gebäudeinstandhaltung und -lagerung

25 Pint Trockenmittel-Luftentfeuchter 110V / 60Hz

Entspricht einem Kompressor-Luftentfeuchter von 50 Pints @ 68°F

Freistehend oder installiert

Industrial dehumidifier EPD50 steel construction with tough epoxy paint finish.Very small for its 25 Pint capacity. Will dry 247 and dry even down to -20°C/-4°F. Can work up to 40°C/104°F.

Steel Inside & OutTough Enough Even for Hiring or Restoration

Selbstregulierender Energieverbrauch, der sich an Luftdruckunterschiede anpasst und immer die richtige Menge an Energie zum effektiven Trocknen verwendet.

3-Loch-Luftentfeuchter

Die eingehende Prozessluft wird staubgefiltert und getrocknet. Die Eingangsluft kann mit einem 125mm / 5″ Kanal ein- und ausgeleitet werden. Die Abluft für feuchte Luft beträgt 40 mm / 1,5″ Kanal.

Die Forschung von Ecor Pro zeigt, dass der EPD50 bei der Trocknung von Gebäuden bei niedrigen Temperaturen vier- bis siebenmal schneller sein wird als ein herkömmlicher Kompressor-Luftentfeuchter

Zugehörige Teile

Erklärte Merkmale

Highly Compact – Small 25 Pint dehumidifier.

 
Dust Filter – This desiccant industrial dehumidifier benefits from a simple reticulated dust filter in a metal frame. Can be shaken clean or easily replaced to prevent dust particles entering the unit and impeding performance.
 
Easy Repair – Thus, maintenance and eventual repair have been thought through with an easy to remove cover that gives easy access to replace cord sets or warn parts by a qualified persons quickly. Prolonging the lifetime of the dehumidifier.
 
On Four Feet – Moreover, anti-scratch plastic feet that are design patented. Swivel out to provide anchor points for the dehumidifier.
 
Carrying Handle – In particular, easy to carry by one person. The handle can be removed when the product is being installed and replaced by a top lid without handle.
 
Humidistat Connection – Hence, an internal humidistat fitted and the possibility to put on an external humidistat. A jack plug connector is on the on the humidistat EPHUM24DF. Turns the dehumidifier on an off automatically. Furthermore, remotely if the dehumidifier is concealed or ducted in position.

Perfect for any climate

Duct Air-In & Out - Der Luftentfeuchter hat alle Kanäle mit Flanschen versehen, so dass Kanäle mit 125mm / 5″ harten oder flexiblen Kanälen hinzugefügt werden können.

 
Nassluftabzug - Der hat einen internen Ventilator. Die Feuchtigkeit wird abgeführt, so dass er auch bei kälteren Temperaturen arbeiten kann. Die Feuchtigkeit wird durch 15% der Prozessluft aus dem System gespült, so dass sie bei leichtem Unterdruck trocknet.
 
“Three Hole System” – The system is classed as a “three hole” system due to the one inlet and two outlets.
 
Beachten Sie, dass die EPD50-Luftentfeuchter mit einem Prozessluftauslassflansch ausgestattet sind, die EPD30-Modelle jedoch nicht, so dass trockene Luft in einen Raum geleitet werden kann.
 
Power Supply – Thus, 110V supply 60Hz
 
Auto Reset - Bei einer Unterbrechung der Stromversorgung setzt der Luftentfeuchter seinen Betrieb fort, sobald die Stromversorgung wieder hergestellt wurde. Perfekt an Orten, an denen eine "schmutzige" Stromversorgung vorhanden ist, die andere elektronisch gesteuerte Produkte beeinträchtigen kann.
 
All Metal Construction – Nevertheless, all metal with epoxy paint finish heat treated for strength inside & outside. Designed for longevity.
 
5m / 15′ Power Cord – Thus, no need to join cables when placed for instance in crawl spaces or lofts in the home for example.

Dehumidifier Installation

This is a 3-Hole dehumidifier meaning that there is one  fan inside.  It is a turbo fan like the other larger units in the range.  Part of the dried process air is turned around, heated and used to purge the internal adsorption wheel of moisture that can be then vented away.

Moisture is "vented away".  No water is produced.  The moist air is vented to the outside or moved to another area that is well ventilated. Most common installation. If the machine is in the room being dried the internal humidistat can be used to regulate humidity.  If ducted and outside the room or house being dried an external humidistat may be needed.

Perfect for crawl space areas or attic areas.  Close openings to the crawl space and the unit will regulate the humidity.  Use ducting to help spread the dry air around the crawl space area.
Recirculating the air to be dried gives a compound effect and gives faster drying.  This system is a "Negative Pressure" system.   Air has to replace the air that has been exhausted.  In a normal home air is actually being replaced  frequently typically 2.5 times per hour. No home is air tight.
The dehumidifier can be hidden from sight.  It can be placed in a cupboard, in a ceiling void or under a floor.  Dry air is taken from the room, dried and then clean, dry filtered air returned.  External humidistat may be needed in that instance.

To read more about garages see here

Perfect for crawl space areas or attic areas.  Close openings to the crawl space and the unit will regulate the humidity.  Use ducting to help spread the dry air around the crawl space area.

Strong Machine Even Used For Commercial Spot Drying

The model is build to a standard that professionals can also use.  The machine is perfect for focus drying.  Wet air is focussed to where the moisture is. Example of "Positive Pressure" or forcing the dry air into areas it is needed
Having the machine in the area being dried and recirculating the air is the most efficient way of drying.  This system is "Negative Pressure. In a small enclosure, covered with plastic sheeting a frame is needed to ensure the tent maintains structure.  Rooms generally are not air tight so in larger rooms air can leak under doors etc

Used on Boats as a "Carry on" or Installed

Perfect for ducting around the boat or for area such as cabin, engine room or forward locker.  Read More

Gewicht 6,4 kg
Abmessungen 28 × 19 × 19 cm
(L x B x H)-(Gewicht)

11,81" x 7,87" x 7,87" - 14,11 lbs

Technologie

Trockenmittel

Maximaler Auszug

12L-25.4pt

Leistung / Stecker / Kabellänge

550W, 110V, 60Hz, 4,6A / Ja US

Strichcode

UPC 860001398021

Farbe / Material

Weiß / Weichstahl Epochenfarbe

Kanal-Größen

40mm (1,5")-125mm (5")

Schwimmbad bereit

Nein

Humidistat Innen / Humidistat Option

Ja / Ja

Tragegriff/Wasserbehälter/Stromkabellänge

Ja / Nein / 15"

Lüfterdrehzahlen/Schall

1 / 52dB

Temperatur öffnen

Minus 4?F bis plus 104?F

Neustart bei Stromausfall / Funktioniert vom DC-AC Coverter

Ja / Ja

Luftstrom CFM

85

Neustart bei Stromausfall

Ja

Werke von DC-AC Coverter

Ja

Wassertank

Nein

Material

ETL, CETL