Filter

EPHUM-I-MAX Wifi Humidistat and Temperature Monitor for EPXXX RESTO and EPXXX MAX Models

Low voltage humidistat for EPXXX RESTO & MAX units. Allows full remote control of the appliance via wifi link.  Uses standard wifi so no data charge provided than lan or dongle internet connection is available to connect to.  Works on 2.4GHz only together with Apple or Android smartphone with free EPHUM-I-MAX App.

SKU: EPHUM-I-MAX Categories: , , , , , , , Tags: ,

CLICK HERE

App Connection App Guide

EPHUM-I-MAX Wifi Humidistat and Temperature Monitor for EPXXX RESTO and EPXXX MAX Models

Installiert in Sekundenschnelle

Easy to operate. Please note there is a 5% tolerance factor built into every dehumidifier. The higher the HIGHER THE HUMIDITY % SETTING THE LESS THE DEHUMIDIFIER WILL DRY and vice-verse. At near 100% the humidistat will effectively not turn the humidistat on. At a very low setting the humidistat will effectively turn the dehumidifier on continuously.

Wall mounted or clips can be slotted in to be able to connect to the front grill or on handle bars where fitted.

Der Feuchtigkeitsprozentsatz bezieht sich auf das relative Feuchtigkeitsniveau der Luft, manchmal auch als RH% bezeichnet.

Ideally place in the inlet air flow either on grill or in air inlet duct.   Cable for the EPHUM-I-MAX  can be extended up to 20’/7m.

Zugehörige Teile

When purchased as seperate item the EPHUM-I-MAX comes with power adaptor and USB plug for powering the EPHUM-I-MAX externally to the unit.  This means that temperature and humidity data can be retrieved from the sensor without the need for connection to any Ecor Pro appliance.  (No control is given to any appliance unless it is connected directly.  Only enviromental data)

Complete Kit

When supplied as spare part

Additional Parts

Not supplied with appliance

Many sensors can be added to an enviroment simply to monitor conditions (up to 999).  The independent sensors can be used to trigger other events or monitors in rooms or App scenes where a monitor can triger an even in another appliance having appliances working smartly together,

NOTE:

Total run time hours data is held inside the unit’s memory.  All other data is stored through the App to the mobile device it is paired with.  No large amount of data is buffered inside the unit.  Data received while there is a wifi connection.

Humidistat Types Explained

EPHUM-I-DRY – LOW VOLTAGE Used with EPXXX RESTO & EPXXX MAX models, Low voltage humidistat with 1.0m / 3″ cable. Comes fitted with RJ11 plug for inserting directly into the unit unique to Ecor Pro. Connects in 4 seconds after unit recognises humidistat device.

EPHUM110E – HIGH VOLTAGE Used with EPD200 / DH3500, EPD150 / DH2500 / DH2511 / DH3511, High voltage humidistat with 1.5m / 4″ cable. Comes fitted with mil standard plug that screws directly into the dehumidifiers in seconds.

Simple humidity probe can be added to ducting and in remote areas also 1.5m / 4′ long.  Plugs into EPHUM110E via a 2.5mm jack plug all provided.

EPHUM24DF – LOW VOLTAGE Used with EPD50 / DH1200, EPD30 / DH800, Low voltage humidistat with 2m / 6″ cable. Also comes fitted with a 2.5mm two pole jack plug fitted directly into the dehumidifier.

Gewicht 0,2 kg
Abmessungen 11,5 × 7,5 × 4,5 cm
(L x B x H)-(Gewicht)

4,5" x 3,0" x 1,8" - 0,4 lbs
Technologie

Humidistat
Strichcode

EAN 5060224950463
Farbe

Weiß
Material

Matte Kunststoffoberfläche
Farbe / Material

Weiß/ Kunststoff
Kanal-Größen

Nicht zutreffend
Schwimmbad bereit

Nein
Humidistat Innen / Humidistat Option

Nicht zutreffend
Tragegriff/Wasserbehälter/Stromkabellänge

Nicht zutreffend / Nicht zutreffend
Lüfterdrehzahlen/Schall

Nicht zutreffend / Nicht zutreffend
Temperatur öffnen

Minus 20?C bis plus 40?C
Neustart bei Stromausfall / Funktioniert vom DC-AC Coverter

Nicht zutreffend / Ja
Luftstrom

Nicht zutreffend

Sie sahen kürzlich...