DH1211 110V DryFan 12L Desiccant Avfuktare

110V supply 50 Hz that can be run off a 12V DC-110V AC converters or 220V to 110V transformers, auto power reset in case of power supply interruption. “3-hole” technology commercial desiccant dehumidifier; water removal 12 litres maximum extraction. Operating range from -20?C up 40?C maximum room temperature for continuous drying applications, with 380 m3/hr air volume capacity (124 m3/hr – Process / 20m3/hr – exhaust air flow). Highly efficient, very quiet fan operation and yet low energy consumption in use for large moisture extraction capacity. 52dB Process air in 125mm – Process air out 125mm – Exhaust air 40mm

installera avfuktare avfuktare av Ecor Pro
avfuktare ladda ner bruksanvisning avfuktare av Ecor Pro
jämföra våra produkter avfuktare av Ecor Pro

INGET VATTEN SOM PRODUCERAS. FUKT VENTILERAS BORT ÄVEN UPPÅT

Perfekt för översvämningstorkning, byggnadsunderhåll & förvaring

12 litre Desiccant Dehumidifier 110V / 50Hz

Fungerar såväl som en 25-literskompressor @18°C

Fristående eller installerat

Industrial dehumidifier DH1211 steel construction with tough epoxy paint finish.

Very small for its 12 litre capacity. Will dry 24/7 and dry even down to -20°C/-4°F. Can work up to 40°C/104°F.

Stål Insida & Ut
Tuff nog även för uthyrning eller restaurering

Kan bäras av en person och transporteras lätt med bärhandtagen.

Självreglerande energianvändning som anpassar sig till lufttrycksskillnader med alltid rätt mängd kraft att torka effektivt

3 Hål avfuktare

Ingångsprocessluften dammfiltreras & torkas. Ingångsluften kan dras in & ut med en 125mm/ 5" kanal. Våtluftsavgassystem är 40mm / 1,5"-kanal

Ecor Pro:s forskning visar att DH1211 kommer att vara fyra till sju gånger snabbare på torkning av byggnader vid låga temperaturer än en traditionell kompressoravfuktare

Delar associerade

Funktioner förklaras

Highly Compact – Small 12 Litre dehumidifier in the market.

Dammfilter – Enkelt retikulerat dammfilter i metallram. Skakad ren eller lätt utbytt. Förhindrar att dammpartiklar kommer in i enheten och hindrar prestanda.

Enkel reparation – Underhåll och eventuell reparation har genomtänkts med ett lätt att ta bort locket som ger enkel åtkomst för att byta ut sladdsatser eller varna delar av en kvalificerad person snabbt. Förlänger avfuktarens livstid.

On Four Feet – Design patented anti scratch plastic feet. Swivel out. Provide anchor points for the dehumidifier.

Carrying Handle – Easy to carry by one person. Removable handle when product is being installed. Replaced by a top lid without a handle.

Humidistat Connection – Det finns både och inre humidistat monterat & möjligheten att sätta på sig en extern humidistat men man kan också läggas till helt enkelt. En kontaktkontakt på luftfukten EPHUM24DF finns på humidistat. Detta kommer att stänga av avfuktaren automatiskt om avfuktaren är dold eller kanaliserad på plats.

Perfekt för alla klimat.

Duct Air-In & Out – Avfuktaren har alla kanaler försedda med flänsar som gör det möjligt att tillsätta kanaling med 125mm / 5" hård eller flexibel kanaling.

Wet Air Exhaust – The has one internal fan. Works in colder temperatures via vented away moisture. The moisture is purged from the system by 15% of the process air. Dries with a slight negative pressure.

“Three Hole System” – One inlet and two outlets.

Note that the DH12XX dehumidifiers have a process air outlet flange. The DH8XX models do not. Thus, dry air ducts into a space.

Strömförsörjning – 110V strömförsörjning 50Hz
Automatisk återställning – Om strömförsörjningen bryts fortsätter avfuktaren att fungera så snart strömmen har återgått. Perfekt på platser där det finns en "smutsig" strömförsörjning som kan påverka andra elektroniskt styrda produkter.
All Metal Construction – All metal med epoxifärgfina värmebehandlad för styrka inuti & utvändigt. Designad för livslängd.
5m / 15′ Power Cord – No need to join cables when placed for instance in crawl spaces or lofts in the home for example.

Dehumidifier Installation

This is a 3-Hole dehumidifier meaning that there is one  fan inside.  It is a turbo fan like the other larger units in the range.  Part of the dried process air is turned around, heated and used to purge the internal adsorption wheel of moisture that can be then vented away.

Moisture is "vented away".  No water is produced.  The moist air is vented to the outside or moved to another area that is well ventilated. Most common installation. If the machine is in the room being dried the internal humidistat can be used to regulate humidity.  If ducted and outside the room or house being dried an external humidistat may be needed.

Perfect for crawl space areas or attic areas.  Close openings to the crawl space and the unit will regulate the humidity.  Use ducting to help spread the dry air around the crawl space area.
Recirculating the air to be dried gives a compound effect and gives faster drying.  This system is a "Negative Pressure" system.   Air has to replace the air that has been exhausted.  In a normal home air is actually being replaced  frequently typically 2.5 times per hour. No home is air tight.
The dehumidifier can be hidden from sight.  It can be placed in a cupboard, in a ceiling void or under a floor.  Dry air is taken from the room, dried and then clean, dry filtered air returned.  External humidistat may be needed in that instance.

To read more about garages see here

Perfect for crawl space areas or attic areas.  Close openings to the crawl space and the unit will regulate the humidity.  Use ducting to help spread the dry air around the crawl space area.

Strong Machine Even Used For Commercial Spot Drying

The model is build to a standard that professionals can also use.  The machine is perfect for focus drying.  Wet air is focussed to where the moisture is. Example of "Positive Pressure" or forcing the dry air into areas it is needed
Having the machine in the area being dried and recirculating the air is the most efficient way of drying.  This system is "Negative Pressure. In a small enclosure, covered with plastic sheeting a frame is needed to ensure the tent maintains structure.  Rooms generally are not air tight so in larger rooms air can leak under doors etc

Used on Boats as a "Carry on" or Installed

Perfect for ducting around the boat or for area such as cabin, engine room or forward locker.  Read More

Vikt 7.2 kg
Dimensioner 44 × 26 × 28 cm
(L x W x H)-(vikt)

11,81 × 7,87 × 7,87 tum – 14,11 lbs

Teknik

Torkmedel

Max utdrag

12L-25.4pt

Ström / Plugg / Sladdlängd

550 W, 110V, 50 Hz, 4,6A / Ja BS/EU

Streckkod

UK EAN 5060224951149, EU EAN 5060224951156

Färg / Material

Vit / Mild stål Epoy Paint

Kanalstorlekar

40mm (1,5")-125mm (5")

Pool redo

Nej

Humidistat Inuti / Humidistat Alternativ

Ja / Ja

Bärhandtag / Vattenbehållare / Nätsladdlängd

Ja / Nej / 3m

Fläkthastigheter / Ljud

1 / 52dB

Fungerande temperatur

Minus 20? C till plus 40? C

Power Out Restart / Fungerar från DC-AC Coverter

Ja / Ja

Luftflödet m3/timme

124 process / 20 avgassystem

Omstart av strömavbrott

Ja

Fungerar från DC-AC Coverter

Ja

Vattentank

Nej

Material

Milt stål expoxy belagda

Godkännande

CE