NO WATER PRODUCED.MOISTURE IS VENTED AWAY. EVEN UPWARDS.
Ideal for Flood Drying, Building Maintenance & Storage.
17L Stainless Steel Desiccant Dehumidifier 110V / 60Hz.
Equivalent to a 30L Compressor Dehumidifier @68°F.
Free Standing or Installed.
Industrial dehumidifier EPD30 stainless steel construction.Very small for its 17 pint capacity. Will dry 24/7. Dries down to -20°C/-4°F. Works up to 40°C/104°F.
Stainless Steel Inside & Out.Tough Enough Even for Hiring or Restoration.
Thus, easy to carry by one person. Transported easily via removable carrying handles.Self-regulating energy usage that adapts to air pressure differences. Uses always the right amount of power to dry effectively.
3 Hole Dehumidifier.
Input process air is dust filtered & dried. Input air can be ducted in & out with a 125mm / 5″ duct. Wet air exhaust is 40mm / 1.5″ duct.
Hence, Ecor Pro’s research shows that the EPD30 will be 4-7 times faster at drying buildings at low temperatures than a traditional compressor dehumidifiers.
- EPHUM24DF Humidistat for DH8XX, DH12XX, EPD30, EPD50
- Flexible Industrial Ducting 45mm / 1.5" Diameter Length 1m / 3'
- Flexible Industrial Ducting 45mm / 1.5" Diameter Length 2m / 6'
- Flexible Industrial Ducting 125mm / 5" Diameter Length 3m / 9'
- Flexible Industrial Ducting 125mm / 5" Diameter Length 6m / 18'
- FILTERDF Filter Three Pack for DH12XX, DH8XX, EPD30, EPD50
- TOPDF8INOX Top Cover Without Handle DH8XX INOX, EPD30-PRO Stainless Steel
Highly Compact – Smallest 17 Pint dehumidifier in the market.
Perfect for any climate.
Duct Air-In & Out – Dehumidifier has all ducts fitted with flanges. Allows ducting to be added with 125mm / 5″ hard or flexible ducting.
This is a 3-Hole dehumidifier meaning that there is one fan inside. It is a Axial fan unlike the other larger units in the range. Axial fans have the advantage of needing less power but have less fan pressure. Fan pressure is needed to force through ducting. That is why there is no ducting flange on the outlet of this unit. Part of the dried process air is turned around, heated and used to purge the internal adsorption wheel of moisture that can be then vented away.
Moisture is "vented away". No water is produced. The moist air is vented to the outside or moved to another area that is well ventilated. Most common installation. If the machine is in the room being dried the internal humidistat can be used to regulate humidity. If ducted and outside the room or house being dried an external humidistat may be needed.