DH2511 110V DryFan 35L Desiccant Avfuktare

110V supply 50 Hz that can be run off a 12V DC-110V AC converters or 220V to 110V transformers, auto power reset in case of power supply interruption. “3-hole” technology commercial desiccant dehumidifier; water removal 35 liters maximum extraction. Operating range from -20?C up 40?C maximum room temperature for continuous drying applications, with 380 m3/hr air volume capacity (380 m3/hr – Process / 75m3/hr – exhaust air flow). Highly efficient, very quiet fan operation and yet low energy consumption in use for large moisture extraction capacity. 56dB Process air in 125mm – Process air out 125mm – Exhaust air 80mm </p

installera avfuktare avfuktare av Ecor Pro
avfuktare ladda ner bruksanvisning avfuktare av Ecor Pro
jämföra våra produkter avfuktare av Ecor Pro


Ideal Flood Dryer.  Restoration Safe

35 litre Desiccant Dehumidifier 110V / 50Hz

Fristående eller installerat

Industrial dehumidifier DH2511 steel construction with tough epoxy paint finish.Very small for its 35 litre capacity. Will dry 24/7 and dry even down to -20°C/-4°F. Can work up to 40°C/104°F.

Steel Inside & OutTough Enough Even for Hiring or Restoration

Can be carried by one person and transported easily with the carrying handles.Self regulating energy usage that adapts to air pressure differences using always the right amount of power to dry effectively

3 Hål avfuktare

Ingångsprocessluften dammfiltreras & torkas. Ingångsluften kan dras in & ut med en 125mm/ 5" kanal. Våtluftsavgassystem är 80mm / 3"-kanal

Ecor Pro’s research shows that the DH2511 will be four to seven times faster at drying buildings at low temperatures than a traditional compressor dehumidifiers

Delar associerade

Funktioner förklaras

Highly Compact – Small 35 litre dehumidifier in the market.

Dust Filter – Simple reticulated dust filter in metal frame. Shaked clean or easily replaced. Prevents dust particles entering the unit and impeding performance.
Easy Repair – Easy to remove cover for maintenance and eventual repair. Quickly gives easy access to replace cord sets or warn parts via qualified person. Prolonging the lifetime of the DH25XX dehumidifier. Cord sets can be replaced in around 20 minutes
På fyra fötter - Anti repa plast fötter.
Carrying Handle – Easy to carry by one person. The handles also protect the dehumidifier duct flanges if in transit.
Humidistat Connection – There is no integral humidistat but one can be added very simply. A military standard connector is on the front of the unit. To add this use the remote humidistat EPHUM220. This will turn the dehumidifier on an off automatically.

Perfekt för alla klimat.

Duct Air-In & Out – Avfuktaren har alla kanaler försedda med flänsar som gör det möjligt att tillsätta kanaling med 125mm / 5" hård eller flexibel kanaling.

Wet Air Exhaust – The DH25XX has one internal fan compared to two in the DH35XX. Both do not produce water. Works in colder temperatures via vented away moisture. The moisture is purged from the system by 15% of the process air. Dries with slight negative pressure.
“Three Hole System” – One inlet and two outlets. Optional use as a four hole industrial dehumidifier via slight duct configuration and accurate duct flow measurement. DH35XX is an easier alternative if concerning.
Power Supply – 110V supply 50Hz.
Auto Reset – If there is an interruption to the power supply, the DH25XX will continue to operate as soon as the power has been returned. Perfect in locations where the there is a “dirty” power supply that can affect other electronically controlled products.
All Metal Construction – All metal med epoxifärgfina värmebehandlad för styrka inuti & utvändigt. Designad för livslängd.
5m / 15 "Nätsladd - inget behov av att ansluta kablar när de placeras till exempel i krypgrunder eller loft i hemmet till exempel.

Dehumidifier Installation



This is a 3-Hole dehumidifier meaning that there is one  fan inside.  Part of the dried process air is turned around, heated and used to purge the internal adsorption wheel of moisture that can be then vented away.

Moisture is "vented away".  No water is produced.  The moist air is vented to the outside or moved to another area that is ventilated. Most common installation.

Focussing the dry air gives faster drying times.  Example of "Positive Pressure" or forcing the dry air into areas it is needed
Recirculating the air to be dried gives a compound effect and gives faster drying.  This system is a "Negative Pressure" system.   Air has to replace the air that has been exhausted with the wet air.

15% of the air that is processed is expelled as wet air.  This air needs to be replaced.  Air from outside the room may be more humid.  This is averted with a larger model.

Having the machine in the area being dried and recirculating the air is the most efficient way of drying.  This system is "Negative Pressure. In a small enclosure, covered with plastic sheeting a frame is needed to ensure the tent maintains structure.  Rooms generally are not air tight so in larger rooms air can leak under doors etc

3-hole systems have one advantage over 4-Hole systems.  Around 60 Watts of energy will be retained in the process air flow with a 4-Hole system.  Normally this is not a problem (Same energy as an old home light bulb) but if it is a variable air valve may be added to balance the system with regen air. 

This assumes that the air from any variable inlet (variable in order to find balance of air flow) is colder than the air inside the room being dried.   Typical applications will include  buildings where heat generated by people is not covered fully by any air conditioning.

Vikt 19.8 kg
Dimensioner 55 × 41 × 47 cm
(L x W x H)-(vikt)

17,52 × 13,86 × 13,58 × 38,58 lbs



Max utdrag


Ström / Plugg / Sladdlängd

850W, 110V, 50Hz, 7.1A / 5m


EAN 5060224951163

Färg / Material

Gul svart / mild stål epoy färg


80mm (3,0")-125mm (5")

Pool redo


Humidistat Inuti / Humidistat Alternativ

Nej / Ja

Bärhandtag / Vattenbehållare / Nätsladdlängd

Ja / Nej / 5m

Fläkthastigheter / Ljud

1 / 56dB

Fungerande temperatur

Minus 20°C to plus 40°C

Power Out Restart / Fungerar från DC-AC Coverter

Ja / Ja

Luftflödet m3/timme

380 process / 75 avgassystem

Omstart av strömavbrott


Fungerar från DC-AC Coverter





Milt stål expoxy belagda



Du visade nyligen...