Filter
USA / CA
Prisbelönt bästa båtavfuktare för maskinrum och kabinutrymmen samt lastrum
Prisbelönt bästa båtavfuktare för maskinrum och kabinutrymmen samt lastrum
Prisbelönt bästa båtavfuktare för maskinrum och kabinutrymmen samt lastrum
Prisbelönt bästa båtavfuktare för maskinrum och kabinutrymmen samt lastrum
Prisbelönt bästa båtavfuktare för maskinrum och kabinutrymmen samt lastrum
Prisbelönt bästa båtavfuktare för maskinrum och kabinutrymmen samt lastrum
Prisbelönt bästa båtavfuktare för maskinrum och kabinutrymmen samt lastrum
Prisbelönt bästa båtavfuktare för maskinrum och kabinutrymmen samt lastrum
Prisbelönt bästa båtavfuktare för maskinrum och kabinutrymmen samt lastrum
Prisbelönt bästa båtavfuktare för maskinrum och kabinutrymmen samt lastrum
Prisbelönt bästa båtavfuktare för maskinrum och kabinutrymmen samt lastrum
Prisbelönt bästa båtavfuktare för maskinrum och kabinutrymmen samt lastrum

EPD50-PRO DryFan 50 Pt rostfritt stål Torkmedel Avfuktare

120V supply 60 Hz that can be run off a 12V DC-110V AC converters , auto power reset in case of power supply interruption. Smallest 25 pints desiccant dehumidifier in the market using “3-hole” technology. Operating range from -4°F up 104?F maximum room temperature for continuous drying applications, built-in humidistat container, and an optional remote humidistat can be added by way of using a simple plug-in low voltage jack plug. Very quiet fan operation at 44dB ideal for small spaces, with 84 CFM air volume capacity (73 CFM – exhaust / 12 CFM regen air flow). Compact, all metal construction inside and outside designed for longevity, flat carrying handle that can be extended to allow easy transport and mobility, and anti-scratch four plastic feet that can be swivelled out to make four anchor points so that the unit can be mounted with suitable screws to walls/ceilings or simply fastened down onto a surface. IP24 rating which means the unit can still operate even in more damp conditions. Reticulated and easy-to-clean dust filter in metal frame to prevent particulates from entering the unit and impeding performance. Duct AIR-IN option is fitted with a metal duct flange on the filter grill to allow for an external 5″ duct to draw in the air from a more remote point, concentrate the most damp air into the unit to be dried if needed. An additional flange can be added to the AIR-OUT but is not provided with the unit. Exhaust duct made easy for permanent installation by plumber or a home DIY person using standard waste pipe 1.61 inch diameter fittings. Easy repair and maintenance, fast access to replace cord sets and worn-out parts Lightweight at 14.1 lbs. and comes with 15 ft. long power cord, minimizing the use of an extension cord when placed in an area where power outlet is limited 52dB Process air in 5″ – Process air out 5″ – Exhaust air 1.5″

SKU: EPD50-PRO Categories: , , , , Tag:
Bäst 2018
installera avfuktare avfuktare av Ecor Pro
avfuktare ladda ner bruksanvisning avfuktare av Ecor Pro
jämföra våra produkter avfuktare av Ecor Pro

NO WATER PRODUCED. MOISTURE IS VENTED AWAY EVEN UPWARDS.

Ideal for Flood Drying, Crawl Spaces, Building Maintenance & Storage.

25 Pint Stainless Steel Desiccant Dehumidifier 110V / 60Hz.

Equivalent to a 50 Pint Compressor Dehumidifier @68°F.

Fristående eller installerad.

Industrial dehumidifier EPD50-PRO stainless steel construction.Very small for its 25 Pint capacity. Operates 24/7 and dry even down to -20°C/-4°F. Works up to 40°C/104°F. Perfect for any climate.

Stainless Steel Inside & Out.Tough Enough Even for Hiring or Restoration.

Thus, can be carried by one person and transported easily with the carrying handles.Furthermore, self-regulating energy usage that adapts to air pressure differences using always the right amount of power to dry effectively.

3 Hole Dehumidifier.

In addition, input process air is dust filtered & dried. Input air can be ducted in & out with a 125mm / 5″ duct. Wet air exhaust is 40mm / 1.5″ duct.Moreover, Ecor Pro’s research shows that the EPD50-PRO will be four to seven times faster at drying buildings at low temperatures than a traditional compressor dehumidifiers.

Delar associerade

Funktioner förklaras

Highly Compact – Small 25 pint dehumidifier in the market.

 
Dammfilter – Enkelt retikulerat dammfilter i metallram. Skakad ren eller lätt utbytt. Förhindrar att dammpartiklar kommer in i enheten och hindrar prestanda.
 
Easy Repair – Hence, maintenance and eventual repair have been thought through with an. Easy to remove cover. Gives easy access to replace cord sets or warn parts by a qualified persons quickly. Prolongs the lifetime of the dehumidifier.
 
On Four Feet – Furthermore, anti scratch plastic feet that are design patented. Swivel out to provide anchor points for the dehumidifier.
 
Carrying Handle – Hence, easy to carry by one person. Moreover, the handle can be easily removed when the product is being installed.
 
Humidistat Connection – Moreover, there is both and internal humidistat fitted. Can put on an external humidistat but one can also be added very simply. A jack plug connector is on the on the humidistat EPHUM24DF. Hence, this will turn the dehumidifier on an off automatically remotely if the dehumidifier is concealed or ducted in position.

Perfekt för alla klimat.

Duct Air-In & Out – Avfuktaren har alla kanaler försedda med flänsar som gör det möjligt att tillsätta kanaling med 125mm / 5" hård eller flexibel kanaling.

 
Wet Air Exhaust – Has one internal fan. Moisture is vented away allowing it to work in colder temperatures. Moisture is purged from the system by 15% of the process air so will dry with slight negative pressure.
 
“Three Hole System” – Further, the system is classed as a “three hole” system due to the one inlet and two outlets.
 
Note that the EPD50 dehumidifiers have a process air outlet flange. The EPD30 models do not. This allows dry air to be ducted into a space.
 
Power Supply – Thus, a 110V supply 60Hz.
 
Auto Reset – Undoubtedly, when there is an interruption to the power supply, the dehumidifier will continue to operate as soon as the power has been returned. Thus, perfect in locations where the there is a “dirty” power supply that can affect other electronically controlled products.
 
All Metal Construction – Indeed, all stainless steel metal inside & outside. Designed for longevity.
 
5m / 15′ Power Cord – Also, no need to join cables when placed for instance in crawl spaces or lofts in the home for example.

Dehumidifier Installation

This is a 3-Hole dehumidifier meaning that there is one  fan inside.  It is a turbo fan like the other larger units in the range.  Part of the dried process air is turned around, heated and used to purge the internal adsorption wheel of moisture that can be then vented away.

Moisture is "vented away".  No water is produced.  The moist air is vented to the outside or moved to another area that is well ventilated. Most common installation. If the machine is in the room being dried the internal humidistat can be used to regulate humidity.  If ducted and outside the room or house being dried an external humidistat may be needed.
Perfect for crawl space areas or attic areas.  Close openings to the crawl space and the unit will regulate the humidity.  Use ducting to help spread the dry air around the crawl space area.
Recirculating the air to be dried gives a compound effect and gives faster drying.  This system is a "Negative Pressure" system.   Air has to replace the air that has been exhausted.  In a normal home air is actually being replaced  frequently typically 2.5 times per hour. No home is air tight.
The dehumidifier can be hidden from sight.  It can be placed in a cupboard, in a ceiling void or under a floor.  Dry air is taken from the room, dried and then clean, dry filtered air returned.  External humidistat may be needed in that instance.

To read more about garages see here

Perfect for crawl space areas or attic areas.  Close openings to the crawl space and the unit will regulate the humidity.  Use ducting to help spread the dry air around the crawl space area.

Strong Machine Even Used For Commercial Spot Drying

The model is build to a standard that professionals can also use.  The machine is perfect for focus drying.  Wet air is focussed to where the moisture is. Example of "Positive Pressure" or forcing the dry air into areas it is needed
Having the machine in the area being dried and recirculating the air is the most efficient way of drying.  This system is "Negative Pressure. In a small enclosure, covered with plastic sheeting a frame is needed to ensure the tent maintains structure.  Rooms generally are not air tight so in larger rooms air can leak under doors etc

Used on Boats as a "Carry on" or Installed

Perfect for ducting around the boat or for area such as cabin, engine room or forward locker.  Read More

Vikt 6,4 kg
Dimensioner 28 × 19 × 19 cm
(L x W x H)-(vikt)

11,81 × 7,87 × 7,87 tum – 14,11 lbs
Teknik

Torkmedel
Max utdrag

12L-25.4pt
Ström / Plugg / Sladdlängd

550W, 110V, 60Hz, 4.6A / Yes US
Streckkod

UPC 860001398038
Färg / Material

Rostfritt stål
Kanalstorlekar

40mm (1,5")-125mm (5")
Pool redo

Nej
Humidistat Inuti / Humidistat Alternativ

Nej / Ja
Bärhandtag / Vattenbehållare / Nätsladdlängd

Ja / Nej / 15"
Fläkthastigheter / Ljud

1 / 52dB
Fungerande temperatur

Minus 4? F till plus 104? F
Power Out Restart / Fungerar från DC-AC Coverter

Ja / Ja
Luftflöde CFM

85
Omstart av strömavbrott

Ja
Fungerar från DC-AC Coverter

Ja
Vattentank

Nej
Material

ETL, CETL