Filtrez

EPHUM-I-DRY Humidistat for EPXXX RESTO and EPXXX MAX Models

Low voltage humidistat for EPXXX RESTO & MAX units. Reguate humidity simply to desired level.  Two colour status indicator and dimable back lit brand back light..

SKU: EPHUM-I-DRY Categories: , , , , , , , Tags: ,

EPHUM-I-DRY Humidistat for EPXXX MAX and EPXXX RESTO Models

Installé en quelques secondes

Easy to operate. Please note there is a 5% tolerance factor built into every dehumidifier. The higher the HIGHER THE HUMIDITY % SETTING THE LESS THE DEHUMIDIFIER WILL DRY and vice-verse. At near 100% the humidistat will effectively not turn the humidistat on. At a very low setting the humidistat will effectively turn the dehumidifier on continuously.

Wall mounted with knock out entry points for cable surface mont or through rear mounting bracket for concealed wire mounting.   Bi-colour status indicator and dimable illuminated brand backlight.

Le pourcentage d'humidité se rapporte au niveau d'humidité relative de l'air, parfois appelé RH%.

Ideally place in the inlet air flow either on grill or in air inlet duct.   Cable for the EPHUM-I-DRY  can be extended up to 20’/7m.

Parties associées

Other Humidistat Types Explained

EPHUM-I-MAX – LOW VOLTAGE Used with EPXXX RESTO & EPXXX MAX models, Low voltage humidistat with 1.0m / 3″ cable. Comes fitted with RJ11 plug for inserting directly into the unit unique to Ecor Pro. Connects in 4 seconds after unit recognises humidistat device.

 

EPHUM110E – HIGH VOLTAGE Used with EPD200 / DH3500, EPD150 / DH2500 / DH2511 / DH3511, High voltage humidistat with 1.5m / 4″ cable. Comes fitted with mil standard plug that screws directly into the dehumidifiers in seconds.

Simple humidity probe can be added to ducting and in remote areas also 1.5m / 4′ long.  Plugs into EPHUM110E via a 2.5mm jack plug all provided.

EPHUM24DF – LOW VOLTAGE Used with EPD50 / DH1200, EPD30 / DH800, Low voltage humidistat with 2m / 6″ cable. Also comes fitted with a 2.5mm two pole jack plug fitted directly into the dehumidifier.

Poids 0,2 kg
Dimensions 11,5 × 7,5 × 4,5 cm
(L x l x H)-(poids)

4,5" x 3,0" x 1,8" - 0,4 lbs
Technologie

Humidistat
Code barre

EAN 5060224950463
Couleur

Blanc
Matériel

Finition plastique mate
Couleur / Matière

Blanc/ Plastique
Dimensions des conduits

Non applicable
Prêt pour la piscine

Non
Humidistat Inside / Option Humidistat

Non applicable
Poignée de transport / Conteneur d'eau / Longueur du cordon d'alimentation

Non applicable / Non applicable
Vitesse des ventilateurs / Son

Non applicable / Non applicable
Température de fonctionnement

De moins 20°C à plus 40°C
Redémarrage par coupure de courant / fonctionne à partir d'un couvercle DC-AC

Non applicable / Oui
Airflow

Non applicable

Vous avez récemment consulté...