EPD200-PRO DryFan 200 Pt Déshumidificateur déshydratant en acier inoxydable

120V supply 60 Hz that can be run off a 12V DC-110V AC converters , auto power reset in case of power supply interruption. “4-hole” technology commercial desiccant dehumidifier; water removal (at 80°F / 60% RH – AHAM) – 74 pints/day (35 liters); 95 pints/day (46 litres) maximum extraction. Operating range from -4°F up to +104°F maximum room temperature for continuous drying applications, with 309 CFM air volume capacity (235 CFM – exhaust / 74 CFM – regen air flow). Highly efficient, very quiet fan operation (58dB) and yet low energy consumption in use for large moisture extraction capacity. 58dB Process air in 5″ – Process air out 5″ – Exhaust air 3″ – Regen air 3″.

installer des déshumidificateurs déshumidificateurs par Ecor Pro
déshumidificateur télécharger le manuel d'utilisation déshumidificateurs par Ecor Pro
comparer nos produits déshumidificateurs par Ecor Pro

Neutral Pressure Focus Drying - FLOOD DRYING

Seal the drying tent and focus dry air saving time, money and carbon footprint
Neutral Pressure Outside

Positive Pressure Outside

Neutral Pressure Inside

How to set up a drying tent

AUCUNE EAU PRODUITE. L'HUMIDITÉ EST ÉVACUÉE, MÊME VERS LE HAUT

Restauration idéale après une inondation, vêtements de mer et applications de restauration

95 pintes Déshumidificateur déshydratant 110V / 60Hz

Equivalent to a 200 Pint Compressor Dehumidifier at 65°F

Libre ou installé

Industrial dehumidifier EPD200-PRO stainless steel construction.Very small for its 95 pint capacity. Will dry 247 and dry even down to -20°C/-4°F. Can work up to +40°C/+104°F.

Stainless Steel Inside & OutTough Enough Even for Hiring or Restoration

Can be carried by one person and transported easily with the carrying handles.Self regulating energy usage that adapts to air pressure differences using always the right amount of power to dry effectively.

Déshumidificateur à 4 trous

L'air de processus d'entrée est filtré et séché par la poussière. L'air d'entrée peut être canalisé vers l'intérieur et l'extérieur avec un conduit de 125mm / 5″. L'évacuation de l'air humide est un conduit de 80mm / 3″ & l'entrée de l'air de régénération également 80mm / 3″.

Les recherches d'Ecor Pro montrent que l'EPD200 PRO sera quatre à sept fois plus rapide pour sécher les bâtiments à basse température qu'un déshumidificateur à compresseur traditionnel

Parties associées

Caractéristiques expliquées

Très compact - Peut-être le plus petit déshumidificateur de 95 pintes du marché.

Dust Filter – Simple reticulated dust filter in metal frame. Can be shaken clean or easily replaced. Prevents dust particles entering the unit and impeding performance.
Easy Repair –  Quick and Easy access to replace cord sets or warn parts by a qualified persons. Accessible for maintenance and eventual repair. Prolonging the lifetime of the EPD200 dehumidifier.
On Four Feet - Pieds en plastique anti-rayures.
Carrying Handle – Easy to carry by one person. Furthermore, the handles also protect the dehumidifier duct flanges if in transit.
Humidistat Connection – There is no integral humidistat but one can be added very simply. A military standard connector is on the front of the unit. To add this use the remote humidistat EPHUM220. This will turn the dehumidifier on an off automatically.
Entrée et sortie d'air des conduits - Le déshumidificateur a tous les conduits équipés de brides pour permettre l'ajout de conduits de 125 mm / 5″ durs ou flexibles.

Wet Air Exhaust – Moreover, the EPD200 has two internal fans compared to one in the EPD150. Both do not produce water. The moisture is vented away allowing it to work in colder temperatures. The moisture is purged from the system by Regen air.

Parfait pour tout climat.

“Four Hole System” – The system is classed as a “four hole” system due to the two inlets and two outlets. Four hole system can dry places pressure neutrally. The EPD200 can there for be used to dry large fridge freezer, for instance.

Alimentation électrique - Alimentation 110V 60Hz.

Auto Reset – In addition, if there is an interruption to the power supply, the EPD200 will continue to operate as soon as the power has been returned. Perfect in locations where there is a “dirty” power supply that can affect other electronically controlled products.

Construction entièrement métallique - Construction métallique entièrement en acier inoxydable pour une meilleure résistance à l'intérieur et à l'extérieur. Conçu pour la longévité.
4m / 12′ Cordon d'alimentation - pas besoin de joindre les câbles lorsqu'ils sont placés par exemple dans les vides sanitaires ou les greniers de la maison.

Dehumidifier Installation

 

 

This is a 4-Hole dehumidifier meaning that there are 2 separate fans inside.  One for the Process-Air (Air that needs to be dried) and the Regen Air that is used to purge the wheel of moistures and is then vented away

Drying a water-damaged room has moved on from the days of lighting a fire and opening the doors and windows. The industry no longer leaves a dehumidifier in the middle of the flood-damaged room with a couple of air movers and hopes for the best, not least because it wastes expensive energy and because contractors are increasingly aware of the need to reduce both their carbon footprint and the time it takes to do the job.

Power availability also means more efficient products can be used on the power supply than more power hungry units.

With saving labour and making effective use of expensive assets increasingly important in a competitive market, focused or targeted drying is a good start, but as we move towards a more sustainable, cost-focused industry, it’s not enough.

Using tenting for target drying ensures the dehumidifier only dries the wet parts of the room and avoids drying unaffected areas, a process that can cause secondary damage by sucking too much moisture out of some of the materials in the rest of the room. In short, drying a whole room to remedy a flood in part of it is remarkably inefficient.

Targeted drying uses plastic sheeting to create a sealed chamber, or ‘tent’, around the wet area of the room, saving significant amounts of energy by not drying the 90% of the room that wasn’t wet in the first place - but even that approach is inefficient.

The inefficiency arises when the tent is fed from outside by the dry air from a desiccant (absorption) dehumidifier, the best choice when drying dense materials like brick or block walls.

As air is blown into the tent, the same volume of air must escape. This positive pressure system means that the drying air is taken from the whole room – as well as from outside if the windows are open. That makes the whole room part of the drying regime, with the dehumidifier forced to dry potentially damp air before putting it into the tent. If the air being fed in can’t be controlled, the drying can’t be controlled either.

The answer is to create a negative pressure system by moving the dehumidifier inside the tent, creating a controlled environment.

Let’s talk maths. In our positive system, a normal three port desiccant dehumidifier moving 150 cubic metres (5300 cft) per hour is probably generating   cubic metres (4200 cft) of dry air for drying and using 30 cubic metres (1000 cft) to dry its wheel. In a typical one cubic metre tent (35 cft) , the air is exchanged 120 times per hour, but if the tent is in a room with a total volume of 60 cubic metres (2100 cft), the air in the room outside the tent is recirculated twice, too – to no purpose.

In a negative system, the air in the tent is exchanged only 30 times but is recirculated 120 times per hour, each time becoming drier, significantly increasing the efficiency of the drying regime and reducing energy usage.

Taking this a step further, Ecor Pro’s four port DH3500/EPD200 and the EPD300 uses a separate air stream to dry its wheel, so it works at an equal pressure and air in the tent is not exchanged with the air in the room. The dehumidifier can be placed inside the tent and the ‘regen’ air to dry the wheel pumped into the tent and back out. Alternatively, the dehumidifier can be placed outside the tent and the air taken from the tent to the dehumidifier and back, which means the drying tent or chamber can be sealed around the ducts to give maximum efficiency.

Air recirculation 100%, air exchange 0%. That is efficient.

Moisture is "vented away".  No water is produced.  The moist air is vented to the outside or moved to another area that is vented. Most common installation.

Focussing the dry air gives faster drying times.  Example of "Positive Pressure" or forcing the dry air into areas it is needed

Recirculating the air to be dried gives a compound effect and gives faster drying.  This system is "Neutral Pressure" and is outside the room being dried.

Having the machine in the area being dried and recirculating the air is the most efficient way of drying.  This system is "Neutral Pressure" and is inside the room being dried.

Operating below zero and can operate in sealed rooms, 4-Hole allows even cold rooms and freezers to reduce moisture problems.

Poids 20,5 kg
Dimensions 44,5 × 35,2 × 34,5 cm
(L x l x H)-(poids)

24,82" x 13,86" x 13,58" - 45,19lbs

Technologie

Dessiccateur

Extrait de Max

45L-95pt

Alimentation / Prise / Longueur du cordon

1400W, 110V, 60Hz, 11,7A / Oui BS/EU

Code barre

UPC 860001398076

Couleur / Matière

Acier inoxydable

Dimensions des conduits

80mm (3.0")-125mm (5")

Prêt pour la piscine

Non

Humidistat Inside / Option Humidistat

Non / Oui

Poignée de transport / Conteneur d'eau / Longueur du cordon d'alimentation

Oui / Non / 12".

Vitesse des ventilateurs / Son

1 / 58dB

Température de fonctionnement

De moins 4?F à plus 104?F

Redémarrage par coupure de courant / fonctionne à partir d'un couvercle DC-AC

Oui / Oui

Flux d'air CFM

309

Redémarrage après une coupure de courant

Oui

Travaux de la couverture DC-AC

Oui

Réservoir d'eau

Non

Matériel

ETL, CETL

Vous avez récemment consulté...