DH1200 INOX DryFan 12L Stainless Steel Desiccant Dehumidifier

Stainless steel. 220V supply 50 Hz that can be run off a 12V DC-220V AC converters or 110V to 220V transformers, auto power reset in case of power supply interruption. “3-hole” technology commercial desiccant dehumidifier; water removal 12 liters maximum extraction. Operating range from -20°C up 40°C maximum room temperature for continuous drying applicatio 210 m3/hr air volume capacity (180 m3/hr – Process / 30m3/hr – exhaust air flow). Highly efficient, very quiet fan operation and yet low energy consumption in use for large moisture extraction capacity. 52dB Process air in 125mm – Process air out 125mm – Exhaust air 40mm

install dehumidifiers dehumidifiers by Ecor Pro
dehumidifier download user manual dehumidifiers by Ecor Pro
compare our products dehumidifiers by Ecor Pro

NO WATER PRODUCED. MOISTURE IS VENTED AWAY EVEN UPWARDS

Ideal for Flood Drying, Building Maintenance & Storage

12 litre Stainless Steel Desiccant Dehumidifier 220V / 50Hz

Equivalent to a 25 Litre Compressor Dehumidifier @18°C

Free Standing or Installed

Industrial dehumidifier DH1200 stainless steel construction

Very small for its 12 litre capacity. Will dry 24/7 and dry even down to -20°C/-4°F. Can work up to 40°C/104°F.

Stainless Steel Inside & Out
Tough Enough Even for Hiring or Restoration

Can be carried by one person and transported easily with the carrying handles.

Self regulating energy usage that adapts to air pressure differences using always the right amount of power to dry effectively

3 Hole Dehumidifier

Input process air is dust filtered & dried. Input air can be ducted in & out with a 125mm / 5″ duct. Wet air exhaust is 40mm / 1.5″ duct

Ecor Pro’s research shows that the DH1200 will be four to seven times faster at drying buildings at low temperatures than a traditional compressor dehumidifiers

Parts Associated

Features Explained

Highly Compact – Small 12 Litre dehumidifier in the market.

Dust Filter – Simple reticulated dust filter in metal frame. Shakened clean or easily replaced. Prevents dust particles entering the unit and impeding performance.

Easy Repair – Maintenance and eventual repair have been thought through with an easy to remove cover that gives easy access to replace cord sets or warn parts by a qualified persons quickly. Prolonging the lifetime of the dehumidifier.

On Four Feet – Design patented anti scratch plastic feet. Provide anchor points for the dehumidifier.

Carrying Handle – Easy to carry by one person.

Humidistat Connection – There is both and internal humidistat fitted & the possibility to put on an external humidistat but one can also be added very simply. A jack plug connector is on the on the humidistat EPHUM24DF. Remotely turns dehumidifier on an off automatically when the dehumidifier is concealed or ducted in position.

Perfect for any climate.

Duct Air-In & Out – The dehumidifier has all ducts fitted with flanges to allow ducting to be added with 125mm / 5″ hard or flexible ducting.

Wet Air Exhaust – The has one internal fan. Works in colder temperatures via The vented away moisture. Moisture is purged from the system by 15% of the process air. Dries with small negative pressure.

“Three Hole System” – One inlet and two outlets.

Note that the DH12XX dehumidifiers have a process air outlet flange.The DH8XX models do not.This allows dry air to be ducted into a space.

Power Supply – 220V supply 50Hz
Auto Reset – If there is an interruption to the power supply, the dehumidifier will continue to operate as soon as the power has been returned. Perfect in locations where the there is a “dirty” power supply that can affect other electronically controlled products.
All Metal Construction – All stainless steel metal inside & outside. Designed for longevity.
5m / 15′ Power Cord – No need to join cables when placed for instance in crawl spaces or lofts in the home for example.

Dehumidifier Installation

This is a 3-Hole dehumidifier meaning that there is one  fan inside.  It is a turbo fan like the other larger units in the range.  Part of the dried process air is turned around, heated and used to purge the internal adsorption wheel of moisture that can be then vented away.

Moisture is "vented away".  No water is produced.  The moist air is vented to the outside or moved to another area that is well ventilated. Most common installation. If the machine is in the room being dried the internal humidistat can be used to regulate humidity.  If ducted and outside the room or house being dried an external humidistat may be needed.

Perfect for crawl space areas or attic areas.  Close openings to the crawl space and the unit will regulate the humidity.  Use ducting to help spread the dry air around the crawl space area.
Recirculating the air to be dried gives a compound effect and gives faster drying.  This system is a "Negative Pressure" system.   Air has to replace the air that has been exhausted.  In a normal home air is actually being replaced  frequently typically 2.5 times per hour. No home is air tight.
The dehumidifier can be hidden from sight.  It can be placed in a cupboard, in a ceiling void or under a floor.  Dry air is taken from the room, dried and then clean, dry filtered air returned.  External humidistat may be needed in that instance.

To read more about garages see here

Perfect for crawl space areas or attic areas.  Close openings to the crawl space and the unit will regulate the humidity.  Use ducting to help spread the dry air around the crawl space area.

Strong Machine Even Used For Commercial Spot Drying

The model is build to a standard that professionals can also use.  The machine is perfect for focus drying.  Wet air is focussed to where the moisture is. Example of "Positive Pressure" or forcing the dry air into areas it is needed
Having the machine in the area being dried and recirculating the air is the most efficient way of drying.  This system is "Negative Pressure. In a small enclosure, covered with plastic sheeting a frame is needed to ensure the tent maintains structure.  Rooms generally are not air tight so in larger rooms air can leak under doors etc

Used on Boats as a "Carry on" or Installed

Perfect for ducting around the boat or for area such as cabin, engine room or forward locker.  Read More

Weight 7.2 kg
Dimensions 44 × 26 × 28 cm
(L x W x H)-(weight)

11.81" x 7.87" x 7.87" – 14.11 lbs

Technology

Desiccant

Max Extract

12L-25.4pt

Power / Plug / Cord length

500W, 220V, 50Hz, 2.2A / Yes BS/EU

Barcode

UK EAN 5060224951033, EU EAN 5060224951040

Colour / Material

Stainless Steel

Duct Sizes

40mm (1.5")-125mm (5")

Swimming Pool Ready

No

Humidistat Inside / Humidistat Option

Yes / Yes

Carrying Handle / Water Container / Power Cord Length

Yes / No / 3m

Fan Speeds / Sound

1 / 52dB

Operting Temperature

Minus 20?C to plus 40?C

Power Out Restart / Works From DC-AC Coverter

Yes / Yes

Airflow m3/hr

124 process / 20 exhaust

Power Out Restart

Yes

Works From DC-AC Coverter

Yes

Water Tank

No

Material

Stailess steel

Approval

CE