EPD100LGR Low Grain Refrigerant Dehumidifier with Water Pump

European 220V/50 Hz 475W / 2.1A (R290 refrigerant) or North American 110V/60 Hz 425W 3.9A(R410a refrigerant) alternatives.  Floor standing on 4 feet with 2 wheels and drag folding handle. Stackable refrigerant dehumidifier,  rotor moulded plastic casing with electronic controls.  Side air outlet can be ducted to focus dry air;  over 88 Pints / 43 litres maximum extraction at maximum temperatures and humidity.  Power rated at  – Operating range from 4°C/40°F up 38°C/100°F.  Integral pump with  maximum  water height of 11ft / 3.5m.  One fan speed with 420 m3/hr / 247 cfm air volume capacity. Sound rated at 50dB. Hose length 40ft / 12m cord length 15ft / 5m

EU Manual

deshumidificador descargar manual de usuario deshumidificadores por Ecor Pro
comparar nuestros productos deshumidificadores por Ecor Pro

Focus Flood Drying

Seal the drying tent to neutrally pressure dry or in the tent for neutral pressure drying saving time, money and carbon footprint
Positive Pressure Outside

Neutral Pressure Inside

How to set up a drying tent

CONDENSATE PRODUCED
WATER IS PUMPED AWAY 

Ideal for Restoration Industry & Construction Industry

43 Litre / 88 Pint Low Grain Refrigerant Compressor Dehumidifier 220V / 50Hz & 110V 60Hz versions

Integral pump lifting water to 3.5m / 11ft

Free Standing. Can be stacked. Folding drag handle 

Will dry 247 and dry up to +38°C/100°F.  Will stop working at +4°C / 40°F. Used in a wide variety of commercial applications where temperatures are likely to be over +25°C / 77°C. Especially designed for flood applications and drying building work, paint or plaster quicker.Very easy to access the internal parts for any service needed. Comes with drainage hose 40ft / 12m long that push fits onto the protected spigot.  Easy to plug / unplug the power cord for easy storage or to replace the power cord if damaged

Rotor Moulded Plastic Construction

Electronic controls are accessible from the front. Measures run time and amps used for easy calculation of energy costs.  EU versions come with 220 commercial water resistant plug.  North American models come with standard domestic plug.Energy efficient with optimum compressor operating times based on an internal microprocessor calculation to optimize performance.One easy connect drain hole with screw tread for secure connection

Side Dry Air Out for Focus Drying 

Allows focus drying in tented areas with ducting.  Perfect to save energy costs and faster drying times.

Partes asociadas

Explicación de las características

Extraction – R410a Version North America 110V 60Hz
88 pints/day (95°F RH95%)
68 pints/day (86°F RH80%)
40 pints/day (80 0F RH60%)

Extraction – R290a Version Europe 220V 50Hz
43 L/day (35°C RH95%)
35 L/day (30°C RH80%)
20 L/day (27°C RH60%)

Wire Mesh & Carbon Filter – In tough aluminium extrusion outer filter frame that is lockable in position with small screw driver.  Easy to clean and durable
Easy Repair – Side panels and top cover easily remove to gain full access to the drain tray and water pump and other electrical parts for repair and maintenance
On Four Grey Rubber Feet and Two Wheels for Easy Dragging – Low profile feel that air stacking and ensure stability but will not interfere with dragging the unit over uneven floors or up steps
One Fan Speed – The fan setting fixed for maximum performance.  420 m3/hr / 247 cfm air volume capacity
Power Supply – 220V 50Hz also  version or 110V/60Hz
Auto Reset – If there is an interruption to the power supply, the dehumidifier will resume automatically No humidistat option
Drainage – Pump drained through a standard push fit connector.  On and off in a few seconds.  Recessed so less chance of damage in transport. Water pump can pump to a height of 11ft / 3.5m. Used with 0.25″ / 7mm hose pipe 5m / 25′
Power Cord – Easy to replace kettle lead power cord for easy transportation and changing if the power cord becomes damaged.  European version come with commercial plug.  North American versions come with standard domestic plug

Need to know efficientcy?

Peso 22 kg
Dimensiones 310 × 370 × 500 cm
(L x W x H)-(peso)

Nett 310 x 370 x 500mm / 12.2" x 14.5" x 19.7" – (22 kg / 50.5 lbs) Gross 380 x 440 x 570mm / 15.0" x 18.0" x 22.5"- (23.5kg / 55 lbs)

Tecnología

Low Grain Refrigerant / Compressor

Max Extract per Day

35°C RH90% 43 Litres / 88 pints – 27°C RH60% – 20 Litres / 68 pints

Alimentación / enchufe / longitud del cable

25' / 5m

Color / Material

Dark Grey / Yellow Moulded Plastic

Tamaño de los conductos

Adaptor provided for inputting adding 150mm / 6" duct

Piscina lista

No

Humidistato en el interior / Opción de humidistato

YES / YES

Asa de transporte / contenedor de agua / cable de alimentación Longitud

2 grip points each side / No / 15' / 5m

Velocidades del ventilador / sonido

1 / 50dB

Temperatura de funcionamiento

Plus 4°C/39°F to plus 40°C/104°F

Reinicio de la salida de energía / Funciona desde el cubrecorriente DC-AC

Sí / No

Airflow m3/hr - cfm

330 – 195

Material

Rotational Moulded Polyethylene & Polypropylene mix

Aprobación

CE, ETL, CETL, GS, RoHS

Recientemente has visto...