DH811 110V Deshumidificador DryFan 8L

110V supply 50 Hz that can be run off a 12V DC-110V AC converters or 220V to 110V transformers, auto power reset in case of power supply interruption. “3-hole” technology commercial desiccant dehumidifier; water removal 8 liters maximum extraction. Operating range from -20°C up 40°C maximum room temperature for continuous drying applications, with 380 m3/hr air volume capacity (90 m3/hr – Process / 14m3/hr – exhaust air flow). Highly efficient, very quiet fan operation and yet low energy consumption in use for large moisture extraction capacity. 49dB Process air in 125mm – Process air out 125mm – Exhaust air 40mm

instalar deshumidificadores deshumidificadores de Ecor Pro
deshumidificador descargar manual de usuario deshumidificadores por Ecor Pro
comparar nuestros productos deshumidificadores por Ecor Pro

NO SE PRODUCE AGUA. LA HUMEDAD SE VENTILA INCLUSO HACIA ARRIBA

Ideal para el secado por inundación, el mantenimiento de edificios y el almacenamiento

8 litros Deshumidificador Desecante 120V / 50Hz

Equivalente a un deshumidificador de compresor de 16 litros a 18°C

Libre o instalado

Deshumidificador industrial DH811 construcción de acero con acabado de pintura epoxi resistente.

Muy pequeño para su capacidad de 8 litros. Se secará 247 y se secará incluso hasta -20°C/-4°F. Puede trabajar hasta 40°C/104°F. Perfecto para cualquier clima.

Acero por dentro y por fuera
Suficiente incluso para la contratación o la restauración

Puede ser transportado por una persona y se puede transportar fácilmente con las asas de transporte.

Uso de energía autorregulada que se adapta a las diferencias de presión del aire usando siempre la cantidad adecuada de energía para secar eficazmente

Deshumidificador de 3 agujeros

El aire de proceso de entrada es filtrado y secado por el polvo. El aire de entrada puede ser conducido dentro y fuera con un conducto de 125 mm / 5″. La salida de aire húmedo es un conducto de 40mm / 1.5″

Hence, Ecor Pro’s research shows that the DH811 will be four to seven times faster at drying buildings at low temperatures than a traditional compressor dehumidifiers

Partes asociadas

Explicación de las características

Altamente compacto - Tal vez el deshumidificador de 8 litros más pequeño del mercado.

Filtro de polvo - El deshumidificador industrial desecante se beneficia de un simple filtro de polvo reticulado en un marco de metal que puede ser sacudido limpio o fácilmente reemplazado para evitar que las partículas de polvo entren en la unidad e impidan el rendimiento.

Fácil reparación - El mantenimiento y la eventual reparación han sido pensados con una cubierta fácil de quitar que permite un fácil acceso para reemplazar los juegos de cables o advertir a las partes por parte de una persona calificada rápidamente. Prolongando la vida útil del deshumidificador.

On Four Feet – Design patented anti scratch plastic feet. Swivel out to provide. Anchor points for the dehumidifier.

Carrying Handle – Easy to carry by one person.

Conexión del humidistato - Hay ambos y un humidistato interno instalado y la posibilidad de poner un humidistato externo pero también se puede añadir uno muy simple. Un conector jack está en el humidistato EPHUM24DF. Esto encenderá y apagará el deshumidificador automáticamente de forma remota si el deshumidificador está oculto o canalizado en su posición.

Conducto de entrada y salida de aire - El deshumidificador tiene todos los conductos equipados con bridas para permitir que se añadan conductos con 125 mm / 5″ conductos duros o flexibles.

Wet Air Exhaust – The has one internal fan. Works in colder temperatures via vented away moisture. Furthermore, the moisture is purged from the system by 15% of the process air. Dries with a small negative pressure.

“Three Hole System” – One inlet and two outlets.

Note that the DH12XX dehumidifiers have a process air outlet flange. The DH8XX models do not. Thus, air ducts into a space.

Suministro de energía - Suministro de 110V 50Hz
Auto Reset – Consequently, if there is an interruption to the power supply, the dehumidifier will continue to operate as soon as the power has been returned. Perfect in locations where the there is a “dirty” power supply that can affect other electronically controlled products.
Construcción de metal - Todo el metal con acabado de pintura epóxica tratado térmicamente para que sea resistente por dentro y por fuera. Diseñado para la longevidad.
5m / 15′ Cable de alimentación - no hay necesidad de unir los cables cuando se colocan, por ejemplo, en los espacios de descanso o en los lofts de la casa, por ejemplo.

Dehumidifier Installation

This is a 3-Hole dehumidifier meaning that there is one  fan inside.  It is a Axial fan unlike the other larger units in the range.  Axial fans have the advantage of needing less power but have less fan pressure.  Fan pressure is needed to force through ducting.  That is why there is no ducting flange on the outlet of this unit.  Part of the dried process air is turned around, heated and used to purge the internal adsorption wheel of moisture that can be then vented away.

Moisture is "vented away".  No water is produced.  The moist air is vented to the outside or moved to another area that is well ventilated. Most common installation. If the machine is in the room being dried the internal humidistat can be used to regulate humidity.  If ducted and outside the room or house being dried an external humidistat may be needed.

Perfect for crawl space areas or attic areas.  Close openings to the crawl space and the unit will regulate the humidity.  Use ducting to help spread the dry air around the crawl space area.
Recirculating the air to be dried gives a compound effect and gives faster drying.  This system is a "Negative Pressure" system.   Air has to replace the air that has been exhausted.  In a normal home air is actually being replaced  frequently typically 2.5 times per hour. No home is air tight.
The machine can just be put in any room such as a garage.  Here the larger model is shown but in smaller garages it can be sufficient.  Moisture is simply vented away.  To read more about garages see here

Used on Boats as a "Carry on" or Installed

Used in many areas on boats.  Leer más
Peso 5.5 kg
Dimensiones 34.5 × 26 × 27 cm
(L x W x H)-(peso)

7.87" x 7.87" x 7.87" - 10.58 lbs

Tecnología

Desecante

Extracto de Max

8L-16.9pt

Alimentación / enchufe / longitud del cable

350W, 110V, 50Hz, 2.9A / Sí BS/EU

Código de barras

UK EAN 5060224951255, EU EAN 5060224951293

Color / Material

Pintura epoyada blanca y suave de acero

Tamaño de los conductos

40mm (1.5")-125mm (5")

Piscina lista

No

Humidistato en el interior / Opción de humidistato

Sí / Sí

Asa de transporte / contenedor de agua / cable de alimentación Longitud

Sí / No / 3

Velocidades del ventilador / sonido

1 / 49dB

Temperatura de funcionamiento

Menos 20?C a más 40?C

Reinicio de la salida de energía / Funciona desde el cubrecorriente DC-AC

Sí / Sí

Flujo de aire m3/hr

90 proceso / 14 escape

Reinicio del apagado

Trabaja desde el DC-AC Coverter

Tanque de agua

No

Material

Acero suave recubierto de expoxy

Aprobación

CE